Nilfisk-ALTO SR 1700 2WD B Safety Systems, Main Technical Data, Stability, Information on brooms

Page 51

USER MANUAL

Stability

Machine stability depends on the conditions in which it is used.

If the machine is used within the conditions of use specified in the manual, it is stable.

To this end, the following tests were carried out under the same conditions on a prototype identical to the series model and no stability problems arose. The conditions were:

Flat ground with good surface conditions:

Transfer maximum speed: 14 km/h

Working speed: from 1 to 8 km/h

Bending radius (maximum speed of 14 km/h): 3 m

Bending radius (speed of 5 km/h): 0 m.

On sloping ground with good surface conditions and maximum longitudinal slope of 20%:

Bending radius (maximum speed of 5 km/h): 3 m

Bending radius (speed of 1 km/h): 0 m. Maximum crossfall while in transfer: 15% Maximum crossfall, at 5 km/h: 20%

The tests were carried out with lowered and empty hopper. For different conditions of use, the machine operator should be able to assess the limits of the machine,

and should, in any case, follow the indications laid down in the manual.

Information on brooms

Side brooms (2, Fig. E)

Polypropylene side broom

Polypropylene and steel side broom

Steel side broom

Nylon side broom

Main brooms (13, Fig. E)

Natural fibre and polypropylene main broom

Polypropylene main broom

Polypropylene and steel main broom

Nylon main broom

Brooms with a moplen shaft or with different bristles can be supplied on request.

SAFETY SYSTEMS

The machine is provided with:

An operator's seat sensor that stops the machine as soon as the operator leaves the seat;

A safety lever on the joystick to avoid accidental wrong operation.

MAIN TECHNICAL DATA

General data

Values

Sweeping system

Mechanical suction

 

 

Loading system

Front

Sweeping range with one side broom

1,300 mm

 

 

Sweeping range with two side brooms

10,700 mm

Collection width

10,000 mm

 

 

Standard hour working capability

12,000 m2

Main broom length

994 mm

 

 

Diameter

380 mm

Charging motor

AMRE 48 V 7 kW

 

 

Broom motor

Hydraulic

Drive motor

Hydraulic

 

 

Suction motor

Electric 48 V

Drive type

Hydrostatic

 

 

Gradeability

15%

Maximum drive speed

9 km/h

 

 

Dust filters

Polyester multi-pocket

Filtering surface

8.5 m²

 

 

Hopper

Front

Capacity

360 litres

 

 

Dumping type

Multilevel

Dumping height

1,510 mm

 

 

Lifting type

Hydraulic

 

 

Overall dimensions

Values

Length

2,500 mm

 

 

Width

1,350 mm

Height

1,570 mm

 

 

Weight in running conditions

2,130 Kg

 

 

Charging motor

Values

Type

AMRE

 

 

Voltage

48V

Power

7 kW

 

 

Maximum speed

2,000 rpm

 

 

33014816(1)2005-07 A

7

Image 51
Contents 3301481612005-07 a SweeperDirective 73/2 Modell/Modèle/Model/ModelEN 60335-1, EN EC Low Voltage3301481612005-07 a Page Allgemeine Anweisungen BetriebsanleitungMaschinenidentifizierung EinleitungAllgemeine Anweisungen VorbedingungTerminologien UND Ihre Bedeutung Verantwortlichkeit DES BedienersSicherheitsvorschriften TRANSPORT, VERLAGERUNG, Installation WarnzeichenAblanden UND Verlagern Technische Eigenschaften Maschinenbeschreibung Informationen zu den Bürsten SicherheitssystemeTechnische Daten StabilitätSteuerungen UND Instrumente AnwendungUmgebungswerte GeräuschpegelGebrauch DER Maschine GebrauchsanweisungenMaschinenabstellen Störungen UND Abhilfen Störungen UND AbhilfenDie Dichtung des Flaps wird von der Bürste Ursache Prüfen Abhilfe Übermäßige ErwärmungWartungstabelle Reinigung UND WartungReinigung Planmässige WartungGleichstrom-Fahrmotor Ausserordentliche Wartung Planmässige PrüfungenBetriebsbatterie ABBAU, Entsorgung AbbauEntsorgung Relaisplatine PläneSchutzplatine SchaltplanSiehe Abb. AF HydraulikplanManuel Dutilisation Avertissements Generaux IntroductionPrecautions Pour LA Securite DES Operateurs Terminologie ET SignificationResponsabilite DE Loperateur TRANSPORT, MANUTENTION, Installation Signaux DattentionDechargement ET Manutention Utilisation Prevue Caracteristiques TechniquesEmballages Controles GenerauxDescription DE LA Machine Informations sur les brosses Systemes DE SecuriteDonnees Techniques Principales StabilitéNiveau DE Bruit Commandes ET InstrumentsUtilisation Valeurs EnvironnementalesUtilisation DE LA Machine Instructions Pour LutilisationArret DE LA Machine Problemes ET Remedes Problemes ET RemedesLa brosse centrale ne descend / monte pas Cause Verifier Remede Réchauffement excessifTableau Dentretien Nettoyage ET EntretienNettoyage Entretien PeriodiqueMoteur à courant continu de traction Entretien Extraordinaire Controles PeriodiquesBatterie DE Service DEMANTELEMENT, Ecoulement DemantelementEcoulement Carte Relais SchemasSchema Electrique Carte FusiblesVoir Fig. AF Schema HydrauliqueIntroduction Purpose Safe-Keeping General WarningsForeword Machine IdentificationExposed person Operators Safety PrecautionsDefinitions Operators ResponsibilityDischarge and Handling TRANSPORTATION, HANDLING, InstallationUSE Technical DataPacking General ChecksMachine Description Information on brooms Safety SystemsMain Technical Data StabilityControls and Instruments USEEnvironmental Conditions Noise LevelMachine USE Instructions for USEMachine Stop Problems and Remedies Problems and Remedies3301481612005-07 a Cause Check Remedy OverheatingMaintenance Table Cleaning and MaintenanceCleaning Periodical MaintenanceDrive direct current motor Periodical Checks Extraordinary MaintenanceAccessory Battery DISMANTLING, Disposal DismantlingDisposal Relay Board DiagramsWiring Diagram Fuse BoardSee Fig. AF Hydraulic DiagramAlgemene Waarschuwingen GebruikershandleidingIdentificatie VAN DE Machine InleidingAlgemene Waarschuwingen VoorwoordGevarenzones DefinitiesVerantwoordelijkheid VAN DE Bediener Veiligheidsmaatregelen Voor DE BedienerVERVOER, HANTERING, Installatie WaarschuwingstekensLossen EN Bediening Technische Gegevens Beschrijving VAN DE Machine Informatie over borstels VeiligheidssystemenBelangrijkste Technische Gegevens StabiliteitBedieningen EN Instrumenten GebruikMilieu GeluidsniveauGebruik VAN DE Machine GebruiksinstructiesMachinestop Problemen EN Oplossingen Problemen EN OplossingenGebruikershandleiding Oorzaak Controleren Oplossing OververhittingAlgemene reiniging van de machine Reiniging EN OnderhoudOnderhoudstabel Reiniging Periodiek OnderhoudCollector Aandrijving gelijkstroommotorBuitengewoon Onderhoud Periodieke ControlesExtra Accu DEMONTEREN, Afdanken DemonterenAfdanken Relaisbord SCHEMA’SBedradingsschema ZekeringenbordZie Afb. AF Schema Hydraulica3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a Page 3301481612005-07 a 210 3301481612005-07 a Nilfisk-Advance SpA

SR 1700 2WD B specifications

The Nilfisk-ALTO SR 1700 2WD B is a powerful ride-on scrubber dryer, specially designed for medium to large indoor areas such as retail spaces, warehouses, and industrial facilities. Built with efficiency and user comfort in mind, this advanced cleaning machine provides exceptional performance with several key features and innovative technologies that set it apart from its competitors.

One of the standout features of the SR 1700 2WD B is its effective dual-brush system that facilitates thorough cleaning of various floor types. The dual rotating brushes ensure an even, deep clean and can easily remove ingrained dirt and grime, leaving surfaces spotless. Furthermore, the adjustable brush pressure allows operators to customize cleaning according to specific surface requirements, optimizing performance while minimizing wear on brushes.

Equipped with a highly efficient vacuum system, the Nilfisk-ALTO SR 1700 2WD B excels in liquid recovery. It effectively picks up water and cleaning solution, resulting in safer, cleaner floors that dry quickly. This feature is particularly beneficial in high-traffic environments where slip hazards must be minimized.

The SR 1700 2WD B also features a reliable and easy-to-use control panel, which makes operation straightforward for any user. The intuitive design reduces the learning curve, allowing operators to concentrate on cleaning rather than grappling with complicated controls. Additionally, the ergonomic driving position enhances comfort during longer shifts, reducing fatigue and improving productivity.

Safety is a critical aspect of the Nilfisk-ALTO SR 1700 2WD B. The machine is designed with several safety features, including an automatic shut-off function to prevent accidents in case of operator error. Furthermore, the low center of gravity design improves stability while maneuvering, particularly in tight spaces and corners.

Moreover, the Nilfisk-ALTO SR 1700 2WD B is built to be environmentally friendly. It effectively reduces water and chemical consumption through its efficient cleaning system, contributing to sustainable cleaning practices. The robust build quality ensures a long lifespan, reducing the need for frequent replacements and minimizing waste.

Overall, the Nilfisk-ALTO SR 1700 2WD B combines cutting-edge technology with user-friendly design, offering reliability, efficiency, and superior cleaning results. Its combination of superior suction, adjustable brush pressure, and safety features make it an excellent choice for any facility looking to enhance its cleaning operations. The machine not only meets but exceeds the expectations of modern cleaning environments.