Nilfisk-ALTO SR 1700 2WD B manuel dutilisation DISMANTLING, Disposal, Dismantling

Page 62

USER MANUAL

DISMANTLING, DISPOSAL

NOTE

Material should be disposed according to the law in force.

DISMANTLING

NOTE

Pay the greatest attention when disconnecting the conductors which are live even when the ignition switch is in the “0” position.

Disconnect the cables from the control panels paying attention to the markings on each cable and referring to the wiring diagrams.

Do not remove the reference numbers from the cables and terminal boards.

Hydraulic system dismantling

Dismantle the hydraulic systems referring to the relevant diagrams.

Mechanical dismantling

Before the machine mechanical dismantling, wash all parts that come into contact with the material and thoroughly clean the rest of the machine.

Refer to the chapter “Transportation” for lifting the machine and safety precautions to be taken.

Packaging

Use packing material suitable for the part weight and features.

NOTE

Secure a plate to the packaging showing weight, content and any other information necessary for transportation.

DISPOSAL

Used oils

Used lubricating and hydraulic oils should not be discharged into the environment (waterways, sewerage systems etc.) but they should be delivered to authorized disposal companies. It is recommended to respect scrupulously the law in force.

Such materials should be stored in perfectly sealed lidded containers, so that the used oil cannot leak out and contaminate other substances, including rain water. Oil filters should be stored in the same way and delivered to authorized disposal companies.

Used lead batteries

Used batteries fall into the “toxic harmful” waste category. They should be delivered to specially authorized companies for disposal.

If not possible, “temporary storage” should be carried out according to the law in force. This means, first and foremost: having a temporary storage authorization. Store in perfectly sealed plastic containers with a capacity at least equal to the volume of the battery electrolyte. On no account should rain water leak into the containers.

Material collected by the machine

The material collected by the machine can and should be delivered as urban waste or similar to the Public Cleansing Services (according to previous agreements).

This is possible provided that the waste does not contain toxic or harmful substances.

When cleaning environments which can present toxic-harmful waste, every single substance should be collected separately and with empty hopper. The waste should then be entirely dumped into special containers whose handling should be carried out according to the law in force and to provincial, regional and state rules.

Scrapping

At end of the machine life, dispose of all the below listed materials which form the machine.

It is recommended to deliver the machine to an authorized company who will provide for the machine correct disposal. For the disposal of oils, filters and batteries, follow the above described procedures. The ABS and metal components can become secondary raw materials. Hoses and gaskets as well as plastic and fibre glass should be sorted into separate groups and delivered to the Public Cleansing Services.

NOTE

Dispose of the machine different materials in suitable refuse disposal sites.

NOTE

Always respect the laws in force in the country concerned.

WEEE 2002/96/EC

18

33014816(1)2005-07 A

Image 62
Contents Sweeper 3301481612005-07 aEC Low Voltage Modell/Modèle/Model/ModelEN 60335-1, EN Directive 73/23301481612005-07 a Page Betriebsanleitung Allgemeine AnweisungenVorbedingung EinleitungAllgemeine Anweisungen MaschinenidentifizierungSicherheitsvorschriften Terminologien UND Ihre BedeutungVerantwortlichkeit DES Bedieners Ablanden UND Verlagern TRANSPORT, VERLAGERUNG, InstallationWarnzeichen Technische Eigenschaften Maschinenbeschreibung Stabilität SicherheitssystemeTechnische Daten Informationen zu den BürstenGeräuschpegel AnwendungUmgebungswerte Steuerungen UND InstrumenteGebrauchsanweisungen Gebrauch DER MaschineMaschinenabstellen Störungen UND Abhilfen Störungen UND AbhilfenDie Dichtung des Flaps wird von der Bürste Übermäßige Erwärmung Ursache Prüfen AbhilfePlanmässige Wartung Reinigung UND WartungReinigung WartungstabelleGleichstrom-Fahrmotor Planmässige Prüfungen Ausserordentliche WartungBetriebsbatterie Entsorgung ABBAU, EntsorgungAbbau Schaltplan PläneSchutzplatine RelaisplatineHydraulikplan Siehe Abb. AFManuel Dutilisation Introduction Avertissements GenerauxResponsabilite DE Loperateur Precautions Pour LA Securite DES OperateursTerminologie ET Signification Dechargement ET Manutention TRANSPORT, MANUTENTION, InstallationSignaux Dattention Controles Generaux Caracteristiques TechniquesEmballages Utilisation PrevueDescription DE LA Machine Stabilité Systemes DE SecuriteDonnees Techniques Principales Informations sur les brossesValeurs Environnementales Commandes ET InstrumentsUtilisation Niveau DE BruitInstructions Pour Lutilisation Utilisation DE LA MachineArret DE LA Machine Problemes ET Remedes Problemes ET RemedesLa brosse centrale ne descend / monte pas Réchauffement excessif Cause Verifier RemedeEntretien Periodique Nettoyage ET EntretienNettoyage Tableau DentretienMoteur à courant continu de traction Controles Periodiques Entretien ExtraordinaireBatterie DE Service Ecoulement DEMANTELEMENT, EcoulementDemantelement Carte Fusibles SchemasSchema Electrique Carte RelaisSchema Hydraulique Voir Fig. AFIntroduction Machine Identification General WarningsForeword Purpose Safe-KeepingOperators Responsibility Operators Safety PrecautionsDefinitions Exposed personTRANSPORTATION, HANDLING, Installation Discharge and HandlingGeneral Checks Technical DataPacking USEMachine Description Stability Safety SystemsMain Technical Data Information on broomsNoise Level USEEnvironmental Conditions Controls and InstrumentsInstructions for USE Machine USEMachine Stop Problems and Remedies Problems and Remedies3301481612005-07 a Overheating Cause Check RemedyPeriodical Maintenance Cleaning and MaintenanceCleaning Maintenance TableDrive direct current motor Extraordinary Maintenance Periodical ChecksAccessory Battery Disposal DISMANTLING, DisposalDismantling Fuse Board DiagramsWiring Diagram Relay BoardHydraulic Diagram See Fig. AFGebruikershandleiding Algemene WaarschuwingenVoorwoord InleidingAlgemene Waarschuwingen Identificatie VAN DE MachineVeiligheidsmaatregelen Voor DE Bediener DefinitiesVerantwoordelijkheid VAN DE Bediener GevarenzonesLossen EN Bediening VERVOER, HANTERING, InstallatieWaarschuwingstekens Technische Gegevens Beschrijving VAN DE Machine Stabiliteit VeiligheidssystemenBelangrijkste Technische Gegevens Informatie over borstelsGeluidsniveau GebruikMilieu Bedieningen EN InstrumentenGebruiksinstructies Gebruik VAN DE MachineMachinestop Problemen EN Oplossingen Problemen EN OplossingenGebruikershandleiding Oververhitting Oorzaak Controleren OplossingPeriodiek Onderhoud Reiniging EN OnderhoudOnderhoudstabel Reiniging Algemene reiniging van de machineAandrijving gelijkstroommotor CollectorPeriodieke Controles Buitengewoon OnderhoudExtra Accu Afdanken DEMONTEREN, AfdankenDemonteren Zekeringenbord SCHEMA’SBedradingsschema RelaisbordSchema Hydraulica Zie Afb. AF3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a 3301481612005-07 a Page 3301481612005-07 a 210 3301481612005-07 a Nilfisk-Advance SpA

SR 1700 2WD B specifications

The Nilfisk-ALTO SR 1700 2WD B is a powerful ride-on scrubber dryer, specially designed for medium to large indoor areas such as retail spaces, warehouses, and industrial facilities. Built with efficiency and user comfort in mind, this advanced cleaning machine provides exceptional performance with several key features and innovative technologies that set it apart from its competitors.

One of the standout features of the SR 1700 2WD B is its effective dual-brush system that facilitates thorough cleaning of various floor types. The dual rotating brushes ensure an even, deep clean and can easily remove ingrained dirt and grime, leaving surfaces spotless. Furthermore, the adjustable brush pressure allows operators to customize cleaning according to specific surface requirements, optimizing performance while minimizing wear on brushes.

Equipped with a highly efficient vacuum system, the Nilfisk-ALTO SR 1700 2WD B excels in liquid recovery. It effectively picks up water and cleaning solution, resulting in safer, cleaner floors that dry quickly. This feature is particularly beneficial in high-traffic environments where slip hazards must be minimized.

The SR 1700 2WD B also features a reliable and easy-to-use control panel, which makes operation straightforward for any user. The intuitive design reduces the learning curve, allowing operators to concentrate on cleaning rather than grappling with complicated controls. Additionally, the ergonomic driving position enhances comfort during longer shifts, reducing fatigue and improving productivity.

Safety is a critical aspect of the Nilfisk-ALTO SR 1700 2WD B. The machine is designed with several safety features, including an automatic shut-off function to prevent accidents in case of operator error. Furthermore, the low center of gravity design improves stability while maneuvering, particularly in tight spaces and corners.

Moreover, the Nilfisk-ALTO SR 1700 2WD B is built to be environmentally friendly. It effectively reduces water and chemical consumption through its efficient cleaning system, contributing to sustainable cleaning practices. The robust build quality ensures a long lifespan, reducing the need for frequent replacements and minimizing waste.

Overall, the Nilfisk-ALTO SR 1700 2WD B combines cutting-edge technology with user-friendly design, offering reliability, efficiency, and superior cleaning results. Its combination of superior suction, adjustable brush pressure, and safety features make it an excellent choice for any facility looking to enhance its cleaning operations. The machine not only meets but exceeds the expectations of modern cleaning environments.