Integra DTR-8.4 Advanced Operation, Using the Multichannel Input, Setting the Multichannel Input

DTR-8.4_En.book Page 63 Thursday, October 16, 2003 11:09 AM

Advanced Operation

Using the Multichannel Input

This section explains how to use the multichannel analog input. Connecting the 5.1 or 7.1 analog outputs of your DVD player to the multichannel analog input allows you to enjoy DVD-Audio discs and Super Audio CDs, pro- viding that your DVD player supports those formats. See page 29 for connection details.

Setting the Multichannel Input

Before using the multichannel input, you need to assign it to an input source. By default, it’s assigned to the DVD input source, as shown in the following table, so if you connect a DVD player to the multichannel input, no fur- ther settings are required.

Note:

• The Net-Tune input source cannot be set to Yes.

Input source	Default setting
DVD	Yes
VIDEO 1	No
VIDEO 2	No
VIDEO 3	No
VIDEO 4	No
VIDEO 5	No
CD	No
PHONO	No
TUNER	No
TAPE	No

1	Press the [Input] button, and then
	roll the scroll wheel to select the
	input source you want to set.

2	Press the scroll wheel, and then
	press the [Setup] button.
	The main menu appears.

3 Use the Up/Down []/[ ] but- tons to select “2. Input Setup,” and then press the [Enter] but- ton.

The Input Setup menu appears.

4	Use the Up/Down [	]/[	] but-
	tons to select “2. Multichannel
	Setup,” and then press the
	[Enter] button.
	The Multichannel Setup menu appears.
	Advanced Menu
	2.Input Setup
	Input:DVD
	2-2.Multichannel Setup
	Input:DVD
	a.Multichannel	:Yes
	Quit:SETUP
5	Use the Left/Right [	]/[	] but-
	tons to select:

Yes: Assigned to multichannel analog input.

No: Not assigned to multichannel analog input.

6	Press the [Setup] button.
	The setup menu closes.

Note:

• This procedure can also be performed by using the DTR-8.4’s [Setup] button, []/[ ]/[]/[ ] but- tons, and [Enter] button.

63