Integra DTR-8.4 instruction manual Naming Presets & Input Sources, OSD Setup, OSD Position

DTR-8.4_En.book Page 73 Thursday, October 16, 2003 11:09 AM

Advanced Setup—Continued

4-3. OSD Setup

■a. Background Color

With this preference you can select a background color for the onscreen setup menus (OSD). The available col- ors are: Blue 1, Blue 2, Green 1, Green 2, Magenta, Red 1, or Red 2.

■b. Component Video

This preference determines whether or not the onscreen setup menus (OSD) are displayed on the TV connected to the COMPONENT VIDEO OUTPUT.

OSD On: OSD displayed.

OSD Off: OSD not displayed.

■c. Immediate Display

This preference determines whether or not actions, such as selecting an input source, are displayed onscreen.

On: Actions displayed.

Off: Actions not displayed.

While a video signal from a video component is being output, actions are not displayed onscreen even if this preference is set to On.

■d. Display Position

With this preference you can specify the position onscreen where you want actions (Immediate Display) to be displayed. There are ten positions from the top to the bottom of the screen.

4-4. OSD Position

■OSD Position

With this preference you can specify the position onscreen where you want the onscreen setup menus (OSD) to appear. Use the [ ]/[ ]/[ ]/[ ] buttons to specify the position.

Naming Presets & Input Sources

This section explains how to name radio presets and input sources. Names may consist of up to 10 characters.

1	Press the [Input] button, and then
	roll the scroll wheel to select the
	input source you want to name.
	If you want to name a radio preset,
	select that preset.
2	Press the scroll wheel, and then
	press the [Setup] button.
	The Basic menu appears onscreen.

3 Use the Up/Down []/[ ] but- tons to select “2. Input Setup,” and then press the [Enter] but- ton.

The Input Setup menu appears.

4	Use the Up/Down [	]/[	] but-
	tons to select “4. Character
	Input,” and then press the [Enter]
	button.
	The Character Input menu appears.
	Advanced Menu
	2.Input Setup
	Input:DVD
	2-4.Character Input
	Input:DVD
	a.Character Display
	b.Character	:No
	:
	Press to edit.
	to clear.
	Quit:SETUP
5	Use the Up/Down [	]/[	] but-

tons to select “a. Character Dis- play,” and use the Left/Right []/ [ ] buttons to select “Yes.” When this setting is set to No, the default name is displayed. It must be set to Yes to display your custom name.

73