Integra DTR-8.4 instruction manual Music Server Settings

DTR-8.4_En.book Page 81 Thursday, October 16, 2003 11:09 AM

Net-Tune—Continued

Music Server Settings

This section explains how to select a network audio Server and how to choose the amount of track informa- tion that appears onscreen (OSD) during Net-Tune play- back.

	1, 2
3, 4	1
	3–5
	2, 6

1	Press the [Input] button, and then
	roll the scroll wheel to select
	either IRD or MSRV.

2	Press the scroll wheel, and then
	press the [Setup] button.
	If the Basic menu appears, use the
	Down [ ] button to select Advanced
	Menu, and press the [Enter] button to
	display the Advanced menu.
3	Use the Up/Down [ ]/[ ] but-

tons to select “2. Input Setup,” and then press the [Enter] but- ton.

The Input Setup menu appears.

4 Use the Up/Down []/[ ] but- tons to select “1. Music Server” or “2. Playback OSD Display,” and then press the [Enter] but- ton.

The Music Server or Playback OSD

Display menu appears.

	2-1.Music Server
	Input:NET A
	a.Select Server
	:*a-nettune
	→OK
	Quit:[SETUP]
5	■ If you select “1. Music Server”:
	Use the Up/Down [	]/[	] but-
	tons to select “a. Select Server,”
	and use the Left/Right [		]/[ ]
	buttons to select a server.
	Servers that are up and running have an
	asterisk (*) before their name.
	If a server is not listed, try restarting it.
	When you’ve selected a server,
	use the Down [ ] button to
	select “OK,’ and then press
	[Enter].
	This completes the server selection pro-
	cedure.
6	■ If you select “2. Playback OSD
	Display”:
	Use the Up/Down [	]/[	] but-

tons to select “a. Playback OSD Display,” and use the Left/Right []/[ ] buttons to select:

Full: All track information is dis- played during playback.

Simple: Only two lines of track infor- mation are displayed during playback.

Off: Nothing is displayed during playback.

Press the [Setup] button.

The setup menu closes.

Note:

•You must select the IRD or MSRV input source to make these settings. The 1. Music Server menu item is not available when a different input source is selected.

•This procedure can also be performed by using the DTR-8.4’s input selector buttons, [Setup] button,

[]/[ ]/[]/[ ] buttons, and [Enter] button.

•The track information display is not affected by the Display Position setting on page 73.

81