Integra DTR-8.4 instruction manual Playing network audio server Tracks

DTR-8.4_En.book Page 79 Thursday, October 16, 2003 11:09 AM

Net-Tune—Continued

Playing network audio server Tracks

This section explains how to select and play tracks on a network audio server through the DTR-8.4. You can select tracks by album, artist, genre, or playlist.

1	Turn on your network audio
	server.
2	Turn on the DTR-8.4.
3	While neither the [Input] button
	nor [Mode] button is illuminated,
	roll the scroll wheel to select
	MSRV (Music Server).

“NET-T” appears on the bottom line. While the DTR-8.4 connects to the net- work, and then the server, the messages “Network Starting...” and “Connect- ing...” appear.

When a connection is established, the track you played last time is selected ready for playback.

4	Press the remote controller’s
	[Display] button.
	The server menu appears onscreen.
5	Use the [Album], [Artist], [Genre],
	or [Playlist] button to select a
	menu.
	Alternatively, use the Up/Down
	[ ]/[ ] buttons to select a menu, and
	then press [Enter].
	The album, artist, genre, or playlist
	menu appears onscreen.
	If you selected the artist or genre menu,
	use the Up/Down [ ]/[	] buttons to
	select an artist or genre, and then press
	[Enter]. A menu of tracks by that artist,
	or of that genre is displayed.
6	Use the Up/Down [	]/[ ] but-

tons to select items on the menu. You can select menu items by number or by first letter. See “Selecting Items by Letter” on page 80.

7	Press the [Enter] or [ ] button to
	start playback.

To display information about the cur- rent track on the DTR-8.4, as shown below, use the Up/Down []/[ ] but- tons.

Information appears on the onscreen display (OSD) as shown below.

Music Server	Play
Track: 1/12	1m20s>

My sweet candy

Album:

My Best 100

Artist:

Happy PanPot

Data:

MP3 160kbps

To return to the previous menu during playback, press the Left [ ] button. To stop or pause playback, press the remote controller’s Stop [] or Pause [] button respectively.

To select the next track, press the Next [ ] button. To select the beginning of the current track, press the Previous

[ ] button. To select the previous track, press the Previous [ ] button twice.

You can select tracks by number during playback with the remote controller’s number buttons, as follows:

To select track #3, press [3].

To select track #10, press 0.

To select track #37, press [CAPS], [3], and 7.

To select track #123, press [CAPS] twice, and then [1], [2], and [3].

To fast forward or fast reverse, press and hold the remote controller’s FF

[ ] or FR [ ] button respectively. If you fast reverse all the way to the beginning of a track, playback starts.

Notes:

•When you connect the DTR-8.4 to a network for the very first time, it connects to the first network audio server it finds. If you’re using several servers, use the Select Server setting to select another server (see page 81).

79