Shindaiwa 82052, SV212 manual Fuel Requirements, Handling Fuel, Mixing Instructions, Metric

Page 11

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

IMPORTANT

Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30 days and oil with fuel stabilizer is not used, it should first be treated with a fuel stabilizer such as STA-BIL™.

Oil is a registered JASO FC classified oil and also meets or exceeds ISO-L-EGD performance requirements. Shindaiwa One is recommended for use in all Shindaiwa low emissions engines.Shindaiwa One also includes a fuel stabilizer.

ENGLISH

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing

or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refu- eling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of 2-stroke oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.

IMPORTANT

Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Fuel to Oil Mix-50:1 Ratio

U.S.METRIC

GAS

OIL

GAS

OIL

Gallons

Fl.oz.

Liter

cc.

1

2.6

4

80

2

5.2

8

160

5

13

20

400

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SV212 Shredder VAC Operator’s manual Table of ContentsIntroduction Personal condition and safety equipment Safety Manual safety symbols and important informationInternational symbols Breathing Protection Physical ConditionEye Protection Hand ProtectionKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaProduct Emission Durability EPA Phase 2 / C.A.R.B. TierEquipment check Emission ControlDescription Located on blower housingContents Blower application Install Blower PipesInstall Vacuum Tube and Bag Assembly AssemblyFuel OperationMetric Fuel RequirementsHandling Fuel Mixing InstructionsStarting cold engine Throttle Trigger/Throttle Position Lever Starting warm engineStopping engine Blower operation Shredder Vac operation Problem Cause RemedyShredder Vac troubleshooting Skill level MaintenanceMaintenance intervals Fuel filter Air filterCooling system Cleaning GrillSpark plug Exhaust system Cleaning Cylinder FinsSpark Arrestor Screen Parts Required None Cylinder Exhaust PortShredder blade Debris bagCarburetor adjustment High Altitude AdjustmentTroubleshooting Chart TroubleshootingStorage Long Term Storage Over 30 DaysModel SV212 Hand Held SpecificationsHOW will a Covered Part be CORRECTED? Manufacturers Warranty CoverageOwners Warranty Responsibilities What does this Warranty COVER?English English Shindaiwa Inc Shindaiwa Corporation 11975 S.W. Herman Rd Aspirador Triturador SV212 Tabla de materias IntroducciónEl manual del operador Condición personal y equipos de seguridad Símbolos internacionalesProtección respiratoria Condición físicaProtección de los ojos Protección de las manosPeligro Lesiones debidas a esfuerzos repetitivosControl de emisiones Fase 2 de EPA / Nivel III de C.A.R.BEquipos Descripción Cubierta del sopladorContenido Aplicación del soplador Instale los tubos del sopladorInstale el conjunto de tubo de vacío y bolsa MontajeCombustible OperaciónImportante Requisitos del combustibleManipulación del combustible Arranque del motor en frío Gatillo del acelerador Arranque con el motor calienteParada del motor Operación del soplador Operación del aspirador triturador Problema del aspirador triturador¡IMPORTANTE MantenimientoNivel de habilidad Intervalos de mantenimientoFiltro de combustible Filtro de aireSistemas de enfriamiento Limpieza de la parrillaBujía Sistema de escape Limpieza de las aletas del cilindroRejilla del apagachispas Piezas necesarias Ninguna Orificio de escape del cilindroHoja desmenuzadora Bolsa de residuosAjuste del carburador Rodaje del motorAjuste de altitud elevada Localización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasEspecificaciones Pequeños Motores DE Exteriores Relacionados CON LAS Emisiones EPA PhaseCalifornia Tier III Emissions Defect Warranty EN Relacionados CON Emisiones EPA Phase 2 / CaliforniaNotas SP27 Shindaiwa Inc Shindaiwa Corporation Aspirateur Broyeur SV212 Table des matières Le manuel d’utilisationAvertissement Sécurité Symboles de sécurité et informations importantesProtection des voies respiratoires Condition physiqueProtection des yeux Protection des mainsGarder une bonne prise Microtraumatismes répétésLisez les manuels Dégagez la zone de travailDurabilité DU Contrôle DES Émissions EPA Phase 2/ C.A.R.B. TierEquipment Contrôle des émissionsCorps de la soufflante Contenu Soufflante Installation des tubes de soufflanteInstallation du tube d’aspiration et du sac AssemblageCarburant UtilisationManipulation du carburant Spécifications pour le carburantDémarrage dun moteur froid Gâchette des gaz Démarrage dun moteur chaudArret du moteur Utilisation de la soufflante Dépannage de la aspirateur broyeur Utilisation de la aspirateur broyeurIntervalles dentretien EntretienNiveaux de difficulte Filtre a carburant Fitlre à airPièces nécessaires BougieSystème de refroidissement Système déchappement Pare-étincellesPièces nécessaires Aucune Lumière d’échappement du cylindreLame de déchiquetage Sac à débrisRéglage du carburateur Rodage du moteurRéglage pour haute altitude Dépannage Remisage Remisage à long terme plus de 30 joursModele SV212 à main CaractéristiquesEN CAS DE Pièce Défectueuse Couverture DE LA Garantie DES FabricantsResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie CE QUE Couvre Cette GarantieRemarques FR27

82052, SV212 specifications

The Shindaiwa SV212,82052 is a powerful and versatile piece of equipment designed to meet the demands of landscaping professionals and enthusiasts alike. This advanced model combines cutting-edge technology and robust construction to deliver outstanding performance and reliability.

One of the notable features of the SV212,82052 is its high-performance engine. Engineered for efficient fuel consumption and lower emissions, the engine provides ample power to tackle a variety of tasks, from trimming and edging to landscaping and brush clearing. Its two-stroke engine design allows for a lightweight construction, making it easy to maneuver and operate for extended periods without causing undue fatigue.

The unit is equipped with an advanced vibration-dampening system that significantly reduces operator fatigue. This technology absorbs vibration during operation, enhancing comfort and improving control when working on extended jobs. This feature is particularly useful for professionals who require precision and endurance while completing landscaping projects.

In terms of functionality, the SV212,82052 features an adjustable cutting height that allows users to customize their work according to specific needs. This versatility means it can handle different types of vegetation effortlessly, from fine grass to thicker brush. The precision-engineered cutting blades ensure a clean and efficient cut every time, promoting a healthier lawn and garden.

Durability is another key characteristic of the Shindaiwa SV212,82052. Constructed from high-quality materials, this equipment is built to withstand the rigors of daily use in various environments. Its robust design resists wear and tear, ensuring that it will last through countless landscaping projects without compromising performance.

User-friendly controls enhance the overall experience as well. The easy-start mechanism minimizes the effort required to start the engine, allowing for quick and efficient operation. Additionally, the unit’s lightweight design means that even less-experienced users can handle it with confidence.

Overall, the Shindaiwa SV212,82052 combines performance, comfort, and durability to serve as an invaluable tool for anyone involved in landscaping. Whether for professional or personal use, this advanced machine is designed to make yard work more efficient and manageable while ensuring exceptional results. With its innovative technologies and thoughtful design, the SV212,82052 stands out as a top choice in its category.
Top Page Image Contents