Windsor 10080480 operating instructions MAINTENANCE-SERVICE Schedule, Service Schedule

MAINTENANCE-SERVICE SCHEDULE

SERVICE SCHEDULE

MAINTENANCE	DAILY	WEEKLY	QUARTERLY
Check machine for cord damage	*
Check recovery dome and gasket for damage and
cleanliness	*
Check brushes – should be clean with no lint or
strings attached	*
Inspect vac shoe for blockage; remove fibers with
coat hanger, etc.	*
Check hoses for wear, blockages, or damage	*
Check handles, switches, and knobs for damage	*
Run one gallon of water through solution system	*
Clean out recovery tank, clean float screen and
check float valve to make sure it moves freely	*
Clean out solution	*
Clean outside of all tanks and check for damage	*
Run vac motor for at least one minute to allow motor
to dry	*
Store with dome off tank to allow the tank to dry	*
Check all bearings for noise		*
Check all gaskets for wear and leakage		*
Check pump pressure; observe spray pattern and
check with gauge if necessary		*
Check and clean solution screen		*
Check brush for wear; ensure bristles are not
damaged		*
Check condition of vac shoe and frame for damage		*
Check overall performance of machine		*
Check vac motor carbon brushes			*
Check belts for wear and replace as necessary			*
Check cables for fraying			*

86302100 CLIPPER DUO 10/02/07 4-1