Hearth and Home Technologies SL-750TRSFHHIPI owner manual Minimum Maximum

F. Vent Diagrams

Top Vent - Horizontal Termination Venting

One Elbow

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 5.3).

WARNING

Fire Risk.

• When using SLP-HRC-SS and SLP-HRC-ZC-

SStermination caps on top vented fireplaces, a one foot minimum vertical vent section is

required before installing first elbow.

•When using DVP-TB1 termination cap on top vented fireplaces, a three foot minimum vertical vent section is required before installing first elbow.

Figure 7.4

V Minimum			H1 Maximum
			SL-750TRSFHHIPI
90º Elbow			1 ft.	305 mm
1/2 ft.		152 mm	2 ft.	610 mm
1-1/2 ft.		457 mm	3 ft.	914 mm
2-1/2 ft.		762 mm	5 ft.	1-1/2 m
3-1/2 ft.		1.1 m	7 ft.	2.1 m
4-1/2 ft.		1.4 m	15 ft.	4.6 m
	H1 Maximum= 15 ft. (4.6 m)

V1 + H1 Maximum= 40 ft. (12.2 m)

V1

H1

Heat & Glo • SL-750TRSFHHIPI • 2156-900 Rev. F • 11/08 25