Used to set the desired horizontal airflow direction.
TON (NOT ON ALL MODELS)
HORIZONTAL AIRFLOW DIRECTION CONTROL BUT-
Used to adjust the time.
TIME SETTING BUTTONS
PLASMA(OPTION)
13 Used to start or stop the plasma-purification function.
14 RESET BUTTON
Used prior to resetting time or after replacing batteries.
15
TIMER SET/CANCEL BUTTONS
9 Used to set the timer when the desired time is obtained and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10 Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11 Used to circulate the room air without cooling or heat- ing.
12 ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature.
ON/OFF TIMER BUTTONS
7 Used to set the time of starting and stopping operation.
8
INDOOR FAN SPEED SELECTOR
4 Used to select fan speed in four steps low, medium, high and CHAOS.
JET COOL
5 Used to start or stop the speed cooling. (Speed cooling operates super high fan speed in cooling mode.)
6 CHAOS SWING BUTTON
Used to stop or start louver movement and set the desired up/down airflow direction.
Operation
Name and Function-Remote Control
The remote control transmits the signals to the system.
1
Remote Control
2
Signal transmitter
3
5 | 6 |
4 | 1 |
| 3 |
ON | OFF |
7 | 10 |
8 | 11 |
SET | CANCEL |
9 | 12 |
2 | PLASMA |
13 | |
15 | 14 |
START/STOP BUTTON
Operation starts when this button is pressed and stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( 
), Heat Pump Model( 
)