LG Electronics LS-Q096ACG, LS-Q096BBG, LS-Q076ABL, LS-Q096BEL Tighten the flare nut with a wrench

• Tighten the flare nut with a wrench.

Open-end wrench (fixed)

		Flare nut
Wrench		Connection pipe
Indoor unit tubing
Outside diameter		Torque
mm	inch	kg.m
Ø6.35	1/4	1.8
Ø9.52	3/8	4.2
Ø12.7	1/2	5.5
Ø15.88	5/8	6.6
Ø19.05	3/4	6.6

•When extending the drain hose at the indoor unit, install the drain pipe.

Drain pipe

Indoor unit drain hose

Adhesive Vinyl tape(narrow)

5.Wrap the insulation material around the connecting portion.

•Overlap the connection pipe insulation material and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there is no gap.

Plastic bands Insulation material

•Wrap the area which accommodates the rear piping housing section with vinyl tape.

Connection	Indoor
	unit pipe
pipe
Vinyl tape	Wrap with vinyl tape
(wide)

Connecting cable

Pipe

Vinyl tape(narrow)

•Bundle the piping and drain hose together by wrap- ping them with vinyl tape for enough to cover where they fit into the rear piping housing section.

Wrap with vinyl tape

Pipe

Vinyl tape(wide)

Drain hose

For left rear piping

1.Route the indoor tubing and the drain hose to the required piping hole position.

2.Insert the piping, drain hose, and the connecting cable into the piping hole.

Connecting cable

Drain pipe

-27-