Haier 3150 SB, 3150 SF, 3150 SA, 1590 SA Pump Matrix, Stainless Steel Sanitary Pumps, 310622L

Pump Matrix

Pump Matrix

3150 Stainless Steel Sanitary Pumps

Your Model No. is marked on the pump’s serial plate. To determine the Model No. of your pump from the follow- ing matrix, select the six digits which describe your pump, working from left to right. The first digit is always S, designating Graco Sanitary diaphragm pumps. The remaining five digits define the pump configuration, size, and materials of construction. For example, a sanitary

ball check pump with a three inch inlet and outlet, San- toprene balls and diaphragms, a pump stand, and no leak detector is model SB3661. To order replace- ment parts, refer to the part lists on pages 26 - 31. The digits in the matrix do not correspond to the reference numbers in the parts drawing and lists.

Sanitary	Pump	Inlet and Outlet		Diaphragm		Check Ball		Leak Detector,
Pump	Configuration	(in.)				Material		Pump Stand
S - (for all pumps)	A 3A Approved	1	1 1/2 x 1 1/2	A	3A Approved	A	3A Approved	A	Leak Detec-
					(EPDM)		(PTFE)		tor and Pump
									Stand
	B Ball Check	2	2 x 2	6	Santoprene®	6	Santoprene®	1	Pump Stand
	F Flapper Check	3	3 x 3	7	Buna-N	7	Buna-N	3	None
		4	4 x 4	8	fluoroelas-	8	fluoroelas-
					tomer		tomer
		5	3 x 2			F	Flapper
		P	NONE

1590 Stainless Steel Sanitary Pumps

The table below shows all available configurations for 1590 Stainless Steel Sanitary Pumps.

Model Number	Pump	Inlet and Outlet	Check Valve	Check Ball Mate-	Diaphragm
	Configuration	(in.)	Style	rial	Material
SABAAA	3A Approved	2 x 2	3A Ball Checks	3A PTFE	3A Approved
					EPDM
SBBAAA	Non-3A Approved	2 x 2	3A Ball Checks	3A PTFE	3A Approved
	No Leak Detector				EPDM
SBBA11	Non-3A Approved	2 x 2	3A Ball Checks	(3A) PTFE	PTFE
	No Leak Detector
SBBA22	Non-3A Approved	2 x 2	3A Ball Checks	Santoprene	Santoprene
	No Leak Detector

310622L 25