Kenmore 385.1 521 2, 15218, 15616, 15718 Twin Needle Stitches Option, 1Stitch selector For model

Twin Needle	Stitches	(Option)				/-\
_1"Stitch selector	(for model	15212):	3
						\
Stitch selector	(for model	15616):	3or9
						\
Stitch selector (for model 15218, 15718): 3,9or 10
Y2_Presser foot:			Zigzag	foot		h}
,_3_Needle thread tension:			1 to4
_4_Stitch length control:			0.5 to	1
_5_Stitch width control:			1 to2.5
Y6_Needle:			Twin needle
			(optional		item)

NOTE: Do not set the stitch width at more than 2.5, otherwise the needle may hit the needle plate or presser foot and could possibly break.

_1_Upper thread guide _2_Check spring holder _3_Thread take-up lever _4_Needle bar thread guide _5_Twin needle (optional item)

Turn off the power switch. Pull up the additional spool pin. Place a piece of felt on the additional spool pin. Make sure you separate the two threads by placing one thread in each needle bar thread guide'(4_.

Change the needle to a twin needle_5_. Thread each needle from front to back.

When you want to shift the fabric to change the sewing direction, you must first raise the needle out of the fabric.

J

f

56