Harman-Kardon AVR507 owner manual Important Note for the Use SCART-Cinch Adapters

Page 15

Installation and Connections

Figure 1: SCART/Cinch-Adapter for playback; signal flow:

SCART Cinch

Figure 2: SCART/Cinch-Adapter for record and playback; signal flow:

SCART Cinch

Figure 3: Cinch/SCART-Adapter for playback; signal flow:

Cinch SCART

Black

Yellow

Red

Black

Red

Blue1

Yellow

Green1

White

Black

Yellow

Red

Important Note for the Use of

SCART-Cinch Adapters:

When video sources are connected to the TV directly with a SCART cable, specific control signals apart from Audio/Video signals will be fed to the TV. These specific signals are: With all video sources, the signal for automatic input selection that switches the TV automatically to the appropriate input as soon as the video source is started. And with DVD players, the signals automatically turning the TV to 4:3/16:9 format (with 16:9 TVs or with 4:3 TVs with selectable 16:9 format) and turning the RGB video decoder of the TV on or off, depending on the DVD player´s setting. With any adapter cable, these control signals will be lost and the appropriate setting of the TV must be made manually.

Note for RGB signal with SCART:

If you use a unit providing RGB signals on a

Figure 4:

SCART/S-Video Adapter

for playback;

signal flow:

SCART Cinch

Figure 5:

SCART/S-Video Adapter

for record and playback;

signal flow:

SCART Cinch

Figure 6:

SCART/S-Video Adapter

for playback;

signal flow:

Cinch SCART

Red

Black

S-Video In

Black

Red

Blue1

Yellow

S-Video In

S-Video Out

Red

Black

S-Video Out

1Also other colours possible, e.g. brown and grey.

SCART output (as e.g. most DVD players do) and you want to use that RGB signal, this SCART output must be connected directly to your TV. Although the AVR can switch three-way video signals (like component signals Y/Pb/Pr), most TVs need separate sync signals for RGB (also with SCART) that cannot be switched and pro- vided by the AVR.

RGB signals can be pathed through the AVR only when no separate sync signal is needed (see last ”Video Connection Note” on page 14).

INSTALLATION AND CONNECTIONS 15

Image 15
Contents AVR507 Limited Edition Audio/Video Receiver Declaration of Conformity Table of ContentsDescription and Features IntroductionFront panel analog A/V inputs Safety Information Important Safety InformationUnpacking Front Panel Controls # Preset Stations Selector Press this Digital Input Selector When playing aInformation on digital audio Digital Audio Outputs Connect these Rear Panel Connections+ and negative terminals Unswitched OutletMain Remote Control Functions See page 32 for more information Channel/8 Channel Direct InputMovies ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsVideo Input jacks Video Connection NotesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aMultiroom IR Link System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupInput Setup Speaker SetupSet Button Fto bring up the Speaker Setup menu Figure Surround Within five seconds, either press the ‹/› buttons Surround Setup Or 6.1/7.1 speaker output configuration is in use¤ Button Dso that the cursor is next to Delay Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeSpeaker/Channel Indicators Night Mode SettingsOutput Level Adjustment Using EzSetSo that on is highlighted Sensor and Indicator off Up the Volume until you can hear the test noise clearlyWhen all channels have the same output level Operation Surround Mode ChartBut no surround speakers No delay availableMix of the in-phase material of the left and right channels No surround channelsBasic Operation Source SelectionChannel/8-Channel Direct Input Volume Up/Down Buttons Surround Mode SelectionSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackPCM Playback Indications Surround Mode TypesDigital Bitstream Indicators Audio, while the main feature is availableTape Recording Output Level Adjustment With Source SignalsNight Mode Normal output level adjustment forSelect to activate the sensor Memory BackupIndicator Select Indicator offSurround Back/Multiroom Speaker Advanced FeaturesTurn On Volume Level Display BrightnessInstallation Advanced Features / Multiroom OperationSemi-OSD Settings Full-OSD Time Out AdjustmentIf the Remote IR Output jack Multiroom SetupMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationProgram Search PTY RDS TuningRDS Operation RDS Display OptionsMust be repeated first Programming the Remote with CodesDirect Code Entry Turn on the unit you wish to program into the AVR remoteProgramming the Remote Code ReadoutMacro Programming Volume Punch-Through Programmed Device FunctionsChannel Control Punch-Through Resetting the Remote Memory SPL Function ListAVR DVD Remote sensor ¯ is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.