Harman-Kardon AVR507 owner manual Technical Specifications

Page 47

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

65 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

5/7 Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

50 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

50 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 50 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz–100kHz

High Instantaneous

 

Current Capability (HCC)

±30 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/68dB (DIN)

Distortion

Mono/Stereo: 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

522–1611kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±10kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (-3dB)

Video Frequency

 

Response (Component)

10Hz-50MHz (-3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

118W idle, 890W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

382mm

Weight

14.0 kg

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman International Industries, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “Pro Logic II” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround, DTS-ES and DTS Neo:6 are trademarks of Digital Theater Systems, Inc.

UltraStereo is a trademark of UltraStereo Corp.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Harman International Industries, Incorporated.

Crystal is a registered trademark of Cirrus Logic Corp.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 47

Image 47
Contents AVR507 Limited Edition Audio/Video Receiver Declaration of Conformity Table of ContentsFront panel analog A/V inputs Description and FeaturesIntroduction Unpacking Safety InformationImportant Safety Information Front Panel Controls Information on digital audio # Preset Stations Selector Press thisDigital Input Selector When playing a Digital Audio Outputs Connect these Rear Panel Connections+ and negative terminals Unswitched OutletMain Remote Control Functions See page 32 for more information Channel/8 Channel Direct InputMovies ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsVideo Input jacks Video Connection NotesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aMultiroom IR Link System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupSet Button Fto bring up the Speaker Setup menu Figure Input SetupSpeaker Setup Surround Within five seconds, either press the ‹/› buttons ¤ Button Dso that the cursor is next to Surround SetupOr 6.1/7.1 speaker output configuration is in use Delay Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeSpeaker/Channel Indicators Night Mode SettingsOutput Level Adjustment Using EzSetSo that on is highlighted When all channels have the same output level Sensor and Indicator offUp the Volume until you can hear the test noise clearly Operation Surround Mode ChartBut no surround speakers No delay availableMix of the in-phase material of the left and right channels No surround channelsChannel/8-Channel Direct Input Basic OperationSource Selection Volume Up/Down Buttons Surround Mode SelectionSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackPCM Playback Indications Surround Mode TypesDigital Bitstream Indicators Audio, while the main feature is availableTape Recording Output Level Adjustment With Source SignalsNight Mode Normal output level adjustment forSelect to activate the sensor Memory BackupIndicator Select Indicator offSurround Back/Multiroom Speaker Advanced FeaturesTurn On Volume Level Display BrightnessInstallation Advanced Features / Multiroom OperationSemi-OSD Settings Full-OSD Time Out AdjustmentIf the Remote IR Output jack Multiroom SetupMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationProgram Search PTY RDS TuningRDS Operation RDS Display OptionsMust be repeated first Programming the Remote with CodesDirect Code Entry Turn on the unit you wish to program into the AVR remoteMacro Programming Programming the RemoteCode Readout Channel Control Punch-Through Volume Punch-ThroughProgrammed Device Functions Resetting the Remote Memory SPL Function ListAVR DVD Remote sensor ¯ is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.