Harman-Kardon AVR507 owner manual Digital Audio Playback, Dolby Digital, PCM Audio Playback

Page 31

Operation

To listen to a program in traditional two-channel stereo, using the front left and front right speakers only (plus the subwoofer, if installed and configured), press the Stereo Button 5

until SURR OFF appears in the Main Information Display ˜.

Digital Audio Playback

Digital audio is a major advancement over older analog surround processing systems such as Dolby Pro Logic. It delivers five or six discrete channels: left front, center, right front, left surround and right surround and with DTS ES (see below) even surround back (with identical signals for left and right). Each channel repro- duces full frequency range (20Hz to 20kHz) and offers dramatically improved dynamic range and significant improvements to signal-to-noise ratios. In addition, digital systems have the capability to deliver an additional channel that is specifically devoted to low-frequency infor- mation. This is the “.1” channel referred to when you see these systems described as “5.1,” “6.1” or “7.1”. The bass channel is separate from the other channels, but since it is intentionally bandwidth-limited, sound designers have given it that unique designation.

Dolby Digital

Dolby Digital (originally known as AC-3®) is a standard part of DVD, and is available on specially encoded LD discs and satellite broadcasts and it is a part of the new high- definition television (HDTV) system.

Note that an optional, external RF demodulator is required to use the AVR to listen to the Dolby Digital sound tracks available on laser discs.

Connect the RF output of the LD player to the demodulator and then connect the digital output of the demodulator to the Optical or Coaxial inputs *Ó of the AVR.

No demodulator is required for use with DVD players or DTS-encoded laser discs.

DTS

DTS is another digital audio system that is capa- ble of delivering 5.1, 6.1 or 7.1 audio. Although both DTS and Dolby Digital are digital, they use different methods of encoding the signals, and thus they require different decoding circuits to convert the digital signals back to analog.

DTS-encoded sound tracks are available on select DVD and LD discs, as well as on special audio- only DTS CDs. You may use any LD, DVD or CD player equipped with a digital output to play DTS-encoded special audio-only CDs with the AVR, but DTS-LDs can be played on LD players and DTS-DVDs on DVD players only. All that is required is to connect the player’s digital output to either the Optical or Coaxial input on the

rear panel

or front panel *Ó.

In order to listen to DVDs encoded with DTS sound tracks, the DVD player must be compatible with the DTS signal as indicated by a DTS logo on the player’s front panel. Note that early DVD players may not be able to play DTS- encoded DVDs. This does not indicate a problem with the AVR, as some players cannot pass the DTS signal through to the digital outputs. If you are in doubt as to the capability of your DVD player to handle DTS DVDs, consult the player’s owner’s manual.

Please note that some DVD players are shipped with their output set for Dolby Digital only. To insure that DTS data is being sent to the AVR, please check the setup menu system on your DVD player to make certain that DTS data output is enabled.

PCM Audio Playback

PCM (Pulse Code Modulation) is the non- com- pressed digital audio system used for compact discs, Non-Dolby Digital/DTS Laserdiscs and some special PCM encoded DVDs. The digital circuits in the AVR are capable of high quality digital-to- analog decoding, and they may be connected directly to the digital audio output of your CD/DVD or LD player (LD only for PCM or DTS programs, for Dolby Digital laser discs an RF adapter is needed, see ”Dolby Digital” above).

Connections may be made to either the Optical

or Coaxial inputs on the rear panel or the front panel Digital Inputs *Ó.

To listen to a PCM digital source, first select the input for the desired source (e.g., CD) to feed its video signal (if any) to the TV monitor and to provide its analog audio signal for recording. Next press the Digital Select button ÛG and then use the ⁄/ ¤ buttons Don the remote, or the Selector buttons 7on the front panel, until the desired choice appears in the Main Information Display ˜, then press the Set button @Fto confirm the choice.

During PCM playback the unit automatically will turn to the default surround mode or to the LOGIC 7 mode but you also may select any surround mode except Dolby Digital or DTS.

Selecting a Digital Source

To utilize either digital mode you must have properly connected a digital source to the AVR. Connect the digital outputs from DVD play- ers, HDTV receivers, satellite systems or CD play- ers to the Optical or Coaxial inputs on the rear or front panel *Ó. In order to provide a backup signal and a source for analog stereo recording, the analog outputs provided on digital source equipment should also be connected to their appropriate inputs on the AVR rear panel (e.g., connect the analog stereo audio output from a DVD to the DVD Audio inputs on the rear panel when you connect the source’s digital outputs).

To select a digital source such as DVD, first select its input using the remote or front panel Input Selector 4% as outlined in this manual in order to feed its video signal (if any) to the TV monitor and to provide its analog audio signal for recording. When the digital input associated with the input selected (e.g. “DVD”) is not selected automatically (due to the input settings made earlier during the system configuration, see page 18), select the digital source by pressing the Digital Input Selector button GÛ and then using the ⁄/¤ buttons Don the remote or the Selector buttons 7 on the front panel to choose any of the OPTICAL or COAXIAL inputs, as they appear in the Main Information Display ˜ or on-screen display.

When the digital source is playing, the AVR will automatically detect whether it is a multichannel Dolby Digital or DTS source or a conventional PCM signal, which is the standard output from CD players.

Note that a digital input (e.g. coaxial) remains associated with any analog input (e.g. DVD) as soon as it is selected, thus the digital input need not be re-selected each time the appropriate input choice (e.g. DVD) is made.

OPERATION 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents AVR507 Limited Edition Audio/Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesFront panel analog A/V inputs Important Safety Information Safety InformationUnpacking Front Panel Controls Digital Input Selector When playing a # Preset Stations Selector Press thisInformation on digital audio Digital Audio Outputs Connect these Rear Panel Connections+ and negative terminals Unswitched OutletMain Remote Control Functions See page 32 for more information Channel/8 Channel Direct InputMovies ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsVideo Input jacks Video Connection NotesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aMultiroom IR Link System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupSpeaker Setup Input SetupSet Button Fto bring up the Speaker Setup menu Figure Surround Within five seconds, either press the ‹/› buttons Or 6.1/7.1 speaker output configuration is in use Surround Setup¤ Button Dso that the cursor is next to Delay Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeSpeaker/Channel Indicators Night Mode SettingsOutput Level Adjustment Using EzSetSo that on is highlighted Up the Volume until you can hear the test noise clearly Sensor and Indicator offWhen all channels have the same output level Operation Surround Mode ChartBut no surround speakers No delay availableMix of the in-phase material of the left and right channels No surround channelsSource Selection Basic OperationChannel/8-Channel Direct Input Volume Up/Down Buttons Surround Mode SelectionSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackPCM Playback Indications Surround Mode TypesDigital Bitstream Indicators Audio, while the main feature is availableTape Recording Output Level Adjustment With Source SignalsNight Mode Normal output level adjustment forSelect to activate the sensor Memory BackupIndicator Select Indicator offSurround Back/Multiroom Speaker Advanced FeaturesTurn On Volume Level Display BrightnessInstallation Advanced Features / Multiroom OperationSemi-OSD Settings Full-OSD Time Out AdjustmentIf the Remote IR Output jack Multiroom SetupMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationProgram Search PTY RDS TuningRDS Operation RDS Display OptionsMust be repeated first Programming the Remote with CodesDirect Code Entry Turn on the unit you wish to program into the AVR remoteCode Readout Programming the RemoteMacro Programming Programmed Device Functions Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory SPL Function ListAVR DVD Remote sensor ¯ is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents