Harman-Kardon AVR507 owner manual Surround Mode Selection, Volume Up/Down Buttons

Page 30

Operation

Controls and Use of Headphones

•Adjust the volume to a comfortable level using the front panel Volume Control ı or remote

Volume Up/Down

î buttons.

•To temporarily silence all speaker outputs press the Mute button ˚. This will interrupt the output to all speakers and the headphone jack, but it will not affect any recording or dubbing that may be in progress. When the system is muted, the word MUTE will blink in the Main Information Display ˜. Press the Mute button ˚ again to return to normal operation.

•During a listening session you may wish to adjust the Bass Control and Treble Control Ú to suit your listening tastes or room acoustics. Note that these controls (and Balance) will not function when the 6/8 channel direct input is in use.

•To set the output of the AVR so that the output is “flat,” with the tone and balance controls de- activated, press the Tone Mode button 8 once or twice so that the words Tone Out appear momentarily in the Main Information Display

˜. To return the tone controls to an active con- dition, press the Tone Mode 8 button once or twice so that the words Tone In momentarily appear in the Main Information Display ˜.

•For private listening, plug the 6.3 mm stereo phone plug from a pair of stereo headphones into the front panel Headphone Jack 4. Note that when the headphone’s plug is connected, the word HEADPHONE will scroll once across the Main Information Display ˜ and all speakers will be silenced. When the headphone plug is removed, the audio feed to the speakers will be restored.

Surround Mode Selection

One of the most important features of the AVR 507 is its ability to reproduce a full multi- channel surround sound field from digital sources, analog matrix surround encoded programs and standard stereo or even mono programs. In all, a total of 23 listening modes are available on the AVR.

Selection of a surround mode is based on personal taste, as well as the type of program source mate- rial being used. For example, CDs, motion pictures or TV programs bearing the logo of one of the major surround-encoding processes, such as Dolby Surround should be played in either the Dolby Pro Logic II Movie (with movies) or Music (with music) surround mode, with any DTS NEO:6 mode or with Harman Kardon´s exclusive Logic 7 Movie Mode, to create a full range 5.1 channel or (with Logic 7 and DTS NEO:6) even 7.1 channel surround signal from surround encoded programs, with a stereophonic left and right rear signal, just as it was recorded (e.g. sound being recorded from left rear side will be heard from that side only, for more details see chart on page 27).

When no rear speakers are in use, the Dolby 3 Stereo mode should be selected with all surround recordings.

Note that when Dolby Digital 2.0 signals (e.g. "D.D. 2.0" tracks from DVD), that are encoded with Dolby Pro Logic information, are received via any digital input, the Dolby Pro Logic II Movie mode will be selected automatically (in addition to the Dolby Digital mode) and will decode a full range 5.1 channel surround sound even from those recordings (see also "Dolby Digital" on page 31).

To create wide, enveloping sound field environ- ments and defined pans and flyovers with all analog stereo recordings select the Dolby Pro Logic II Music or Emulation mode or Harman Kardon’s exclusive Logic 7 Music mode for a dramatic improvement in comparison to the Dolby Pro Logic (I) mode of former times.

NOTE: Once a program has been encoded with matrix surround information, it retains the sur- round information as long as the program is broadcast in stereo. Thus, movies with surround sound may be decoded via any of the analog sur- round modes such as Pro Logic II Cinema, Logic 7 Cinema or DTS Neo:6 Cinema, when they are broadcast via conventional TV stations, cable, pay-TV and satellite transmission. In addition, a growing number of made-for-television programs, sports broadcasts, radio dramas and music CDs are also recorded in surround sound. You may view a list of these programs at the Dolby Laboratories Web site at www.dolby.com.

Even when a program is not listed as carrying intentional surround information, you may find that the Dolby Pro Logic II Music, DTS NEO:6 Music or Logic 7 Music or Enhanced modes often deliver enveloping surround presentations through the use of the natural surround information present in all stereo recordings.

However, for stereo programs without any surround information the Theater, Hall and 5/7CH Stereo modes should be tried (effective particularly with old ”extreme” stereo recordings) and for mono programs, we suggest that you try the Theater or Hall modes. And when you use only two front channel speakers you should select Harman’s patented VMAx mode, delivering a virtually three dimensional sound space with two speakers only.

Surround modes are selected using either the front panel controls or the remote. To select a new surround mode from the front panel, first press the Surround Mode Group Selector Button 5 until the desired major surround mode group such as Dolby, DTS or Logic 7 is selected. Next, press the Surround Mode Selector Button 9 to choose the specific individual surround mode.

To select a surround mode using the remote con- trol, press the button for the major surround mode group that includes the mode you wish to choose from: Dolby M, DTS Surround N,

DTS Neo:6 , Logic 7 O, Stereo or DSP Surround A. The first press of the button will show the current mode from that group if it is already in use, or the first available mode if you are currently using another mode. To cycle through the available modes in that group press the button again until the desired mode appears in the Main Information Display ˜ and the on-screen display.

To select from the DSP modes (Hall 1, Hall 2, Theater, VMAx Near or VMAx Far) press the Surround Mode Selector Arepeatedly to scroll through the list of available modes.

As the surround modes change, a blue LED will light next to the current mode in the Surround Mode Indicators ( list on the front panel.

Note that the Dolby Digital or DTS modes may only be selected when a digital input is in use. In addition, when a digital source is present, the AVR will automatically select and switch to the correct mode (Dolby Digital or DTS), regardless of the mode that has been previously selected. For more information on selecting digital sources, see the following section of this manual.

When the 6-Channel/8-Channel direct inputs are in use there is no surround processing, as these inputs take the analog output signals from an optional, external DVD-Audio or SACD player, or another source device and carry them straight through to the volume control.

30OPERATION

Page 29 Page 31
Image 30
Page 29 Page 31
Contents AVR507 Limited Edition Audio/Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionFront panel analog A/V inputs Safety Information Important Safety InformationUnpacking Front Panel Controls # Preset Stations Selector Press this Digital Input Selector When playing aInformation on digital audio Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet + and negative terminalsMain Remote Control Functions Channel/8 Channel Direct Input See page 32 for more informationMovies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Video Connection Notes Scart A/V ConnectionsVideo Input jacks Important Note for Adapter CablesIf you use a unit providing RGB signals on a Important Note for the Use SCART-Cinch AdaptersAC Power Connections System and Power ConnectionsMain Room Remote Control Extension Multiroom IR LinkSpeaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupSet Button Fto bring up the Speaker Setup menu Figure Surround Within five seconds, either press the ‹/› buttons Surround Setup Or 6.1/7.1 speaker output configuration is in use¤ Button Dso that the cursor is next to Stereo-Digital Mode Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Delay SettingsUsing EzSet Night Mode SettingsOutput Level Adjustment Speaker/Channel IndicatorsSo that on is highlighted Sensor and Indicator off Up the Volume until you can hear the test noise clearlyWhen all channels have the same output level Surround Mode Chart OperationNo surround channels No delay availableMix of the in-phase material of the left and right channels But no surround speakersBasic Operation Source SelectionChannel/8-Channel Direct Input Surround Mode Selection Volume Up/Down ButtonsPCM Audio Playback Digital Audio PlaybackDolby Digital Selecting a Digital SourceAudio, while the main feature is available Surround Mode TypesDigital Bitstream Indicators PCM Playback IndicationsNormal output level adjustment for Output Level Adjustment With Source SignalsNight Mode Tape RecordingIndicator off Memory BackupIndicator Select Select to activate the sensorDisplay Brightness Advanced FeaturesTurn On Volume Level Surround Back/Multiroom SpeakerFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationSemi-OSD Settings InstallationMultiroom Operation Multiroom SetupMultiroom Operation If the Remote IR Output jackTuner Operation Basic Tuner OperationRDS Display Options RDS TuningRDS Operation Program Search PTYTurn on the unit you wish to program into the AVR remote Programming the Remote with CodesDirect Code Entry Must be repeated firstProgramming the Remote Code ReadoutMacro Programming Volume Punch-Through Programmed Device FunctionsChannel Control Punch-Through Resetting the Remote Memory Function List SPLAVR DVD Power Switch 1 is pushed Troubleshooting GuideProcessor Reset Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents