Harman-Kardon AVR507 owner manual Input Setup, Speaker Setup

Page 19

System Configuration

To make this process as quick and as easy as pos- sible, we suggest that you use the full-OSD sys- tem with the on-screen menus, and step through each input.

Input Setup

The first step in configuring the AVR is to select an input, i.e. to associate an analog or digital input with each input source in use, e.g. CD or DVD. Note that once an input is selected, all settings for the Digital Input, Speaker Configura- tion, Delay and Surround Mode will ”attach” themselves to that input and be stored in a nonvolatile memory. This means that once made, the selection of an input will automatically recall those settings. For that reason, the procedures described below must be repeated for each input source so that you have the opportunity to custom tailor each source to your specific listening requirements. However, once made they need not be changed again unless you need to alter a setting.

When using the full-OSD system to make the setup adjustments, press the OSD button L once so that the MASTER MENU (Figure 1) appears. Note that the cursor will be next to the INPUT SETUP line. Press the Set button

Fto enter the menu and the INPUT SETUP menu (Figure 2) will appear on the

screen. Press the /buttons E until the desired input name appears in the highlighted video, as well as being indicated in the front panel Input Indicators ˆ by the blue LED next to the desired input name. If the input will use the standard left/right analog inputs, no further adjustment is needed (except with DVD).

* I N P U T

S E T U P *

 

 

 

 

I N P U T

 

:

V I D E O 1

 

 

 

D I G I T A L

I N :

A N A L O G

 

B A C K T O

M A S T E R M E N U

 

 

 

 

 

 

Figure 2

If you wish to associate one of the digital inputs with the selected input source, press the ¤ Button Don the remote while the INPUT SETUP menu (Figure 2) is on the screen, and note that the on-screen cursor will drop down to the DIGITAL IN line. Press the /Buttons

Euntil the name of the desired digital input appears. To return to the Analog input, press the buttons until the word ANALOG appears. When the correct input source appears, press the ¤ button Duntil the cursor appears next to BACK TO MASTER MENU, and press the Set Button F.

To associate an analog or digital input with the input source currently selected at any time using the discrete function buttons, press the Digital Input Select Button ÛGon the front panel or the remote while the full-OSD is not in use. Within five seconds, make your input selection using the Selector buttons on the front panel 7 or the /¤ DButtons on the remote until the desired digital or analog input is shown in the Main Information Display ˜ and in the lower third of the video display connected to the AVR 507. Press the Set Button Fto enter the new input assignment.

Speaker Setup

This menu tells the AVR which type of speakers are in use. This is important as it adjusts the set- tings that determine which speakers receive low- frequency (bass) information. For each of these settings use the LARGE setting if the speakers for a particular position are traditional full-range loudspeakers that are capable of reproducing sounds below 100Hz.

Use the SMALL setting for smaller, frequency- limited satellite speakers that do not reproduce sounds below 100Hz. Note that when “small” speakers are used, a subwoofer is required to reproduce low-frequency sounds. Remember that the “large” and “small” descriptions do not refer to the actual physical size of the speakers, but to their ability to reproduce low-frequency sounds. If you are in doubt as to which category describes your speakers, consult the specifications in the speakers’ owner’s manual, or ask your dealer.

This menu screen also allows you to enter the set- tings for the AVR’s Triple Crossover feature that allows a different crossover point to be used for the front left/right, center and surround speakers. In systems where full-range or tower speakers are used for the front soundstage or where different brands or models are in use at the various speak- er positions, this feature allows you to custom tai- lor the bass management and redirection circuits with a precision not previously possible.

At last, this menu also makes you chose if the speaker setting will be the same for each input source (GLOBAL), or will be set differently for each input (INDEPENDENT).

Notes:

When "Independent" is selected for the speak- er settings (see below), they need to be made for each input individually and you can deter- mine which speaker should be used depending on the input source selected. So it´s possible e.g. to turn off the Center and/or the Sub with any music source selected and to use them with any movie input source.

With the currently selected input all speaker settings will be copied to all other surround modes (as far as speakers are used with them) and need not be repeated when another sur- round mode is selected with that input.

It is easiest to enter the proper settings for the speaker setup through the SPEAKER SETUP menu (Figure 3). So press the OSD Button Lto bring up the MASTER MENU (Figure 1), and then press the ¤ Button D twice so that the cursor is on the SPEAKER SETUP line. At this point, press the

Set Button Fto bring up the SPEAKER SETUP menu (Figure 3).

* S P E A K E R

S E T U P *

 

 

 

 

 

 

M O D E

:

S I Z E

X- O V E R

 

 

 

 

 

L E F T / R I G H T :

L A R G E

 

 

 

 

 

 

 

 

 

C E N T E R

:

S M A L L

 

 

 

 

 

 

 

 

 

S U R R O U N D

:

S M A L L

 

 

 

 

 

 

 

 

S U R R B A C K

:

S M A L L

 

 

 

 

 

 

S U B W O O F E R

:

S U B ( L F E )

 

 

 

 

 

 

 

 

B A S S M G R

:

G L O B A L

 

 

B A C K T O M A S T E R M E N U

Figure 3

The first line of the SPEAKER SETUP menu (Figure 3) allows you to switch the menu to change either the underlying speaker size setting or the exact crossover point used for that speaker group if set to "Small". For the first pass through the menu, leave the setting at its default option of SIZE, and then proceed as outlined below. Once the speaker choices have been set you may wish to return to this line to change the option so that the crossover settings may be adjusted.

1.Before you start the speaker setting, you should determine if you want all inputs being configured with the same speaker size setting (GLOBAL) or if all inputs should be configured individually (INDEPENDENT).

To configure all inputs for "Global" or "Inde- pendent" press the Button Dtwice so that the cursor is next to the BASS MGR line.

This setting allows you to use the same speaker configuration for all inputs, or to have different settings for each input. In most cases the factory default setting of GLOBAL will be appropriate, as most listeners do not need to have individual- ized speaker settings. However, some listeners, particularly those with full-range front speakers that are used for both movies and music may pre- fer that different speaker settings be used when listening to music through a CD player as opposed to a movie from a DVD player, VCR or cable/satellite set top.

SYSTEM CONFIGURATION 19

Image 19
Contents AVR507 Limited Edition Audio/Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesFront panel analog A/V inputs Important Safety Information Safety InformationUnpacking Front Panel Controls Digital Input Selector When playing a # Preset Stations Selector Press thisInformation on digital audio Digital Audio Outputs Connect these Rear Panel Connections+ and negative terminals Unswitched OutletMain Remote Control Functions See page 32 for more information Channel/8 Channel Direct InputMovies ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsVideo Input jacks Video Connection NotesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aMultiroom IR Link System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupSpeaker Setup Input SetupSet Button Fto bring up the Speaker Setup menu Figure Surround Within five seconds, either press the ‹/› buttons Or 6.1/7.1 speaker output configuration is in use Surround Setup¤ Button Dso that the cursor is next to Delay Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeSpeaker/Channel Indicators Night Mode SettingsOutput Level Adjustment Using EzSetSo that on is highlighted Up the Volume until you can hear the test noise clearly Sensor and Indicator offWhen all channels have the same output level Operation Surround Mode ChartBut no surround speakers No delay availableMix of the in-phase material of the left and right channels No surround channelsSource Selection Basic OperationChannel/8-Channel Direct Input Volume Up/Down Buttons Surround Mode SelectionSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackPCM Playback Indications Surround Mode TypesDigital Bitstream Indicators Audio, while the main feature is availableTape Recording Output Level Adjustment With Source SignalsNight Mode Normal output level adjustment forSelect to activate the sensor Memory BackupIndicator Select Indicator offSurround Back/Multiroom Speaker Advanced FeaturesTurn On Volume Level Display BrightnessInstallation Advanced Features / Multiroom OperationSemi-OSD Settings Full-OSD Time Out AdjustmentIf the Remote IR Output jack Multiroom SetupMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationProgram Search PTY RDS TuningRDS Operation RDS Display OptionsMust be repeated first Programming the Remote with CodesDirect Code Entry Turn on the unit you wish to program into the AVR remoteCode Readout Programming the RemoteMacro Programming Programmed Device Functions Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory SPL Function ListAVR DVD Remote sensor ¯ is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.