Harman-Kardon AVR507 owner manual Important Safety Information, Unpacking

Page 4

Safety Information

Important Safety Information

Verify Line Voltage Before Use

Your AVR has been designed for use with 220- 240-Volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service depot with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.

Installation Location

■To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances a fan may be required.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.

4SAFETY INFORMATION

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AVR507 Limited Edition Audio/Video Receiver Table of Contents Declaration of ConformityIntroduction Description and FeaturesFront panel analog A/V inputs Important Safety Information Safety InformationUnpacking Front Panel Controls Digital Input Selector When playing a # Preset Stations Selector Press thisInformation on digital audio Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet + and negative terminalsMain Remote Control Functions Channel/8 Channel Direct Input See page 32 for more informationMovies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections Video Input jacksVideo Connection Notes Important Note for Adapter CablesIf you use a unit providing RGB signals on a Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Main Room Remote Control ExtensionAC Power Connections Multiroom IR LinkSpeaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnSpeaker Setup Input SetupSet Button Fto bring up the Speaker Setup menu Figure Surround Within five seconds, either press the ‹/› buttons Or 6.1/7.1 speaker output configuration is in use Surround Setup¤ Button Dso that the cursor is next to Configuring the Surround Off Stereo Modes Stereo-Direct Bypass ModeStereo-Digital Mode Delay SettingsNight Mode Settings Output Level AdjustmentUsing EzSet Speaker/Channel IndicatorsSo that on is highlighted Up the Volume until you can hear the test noise clearly Sensor and Indicator offWhen all channels have the same output level Surround Mode Chart OperationNo delay available Mix of the in-phase material of the left and right channelsNo surround channels But no surround speakersSource Selection Basic OperationChannel/8-Channel Direct Input Surround Mode Selection Volume Up/Down ButtonsDigital Audio Playback Dolby DigitalPCM Audio Playback Selecting a Digital SourceSurround Mode Types Digital Bitstream IndicatorsAudio, while the main feature is available PCM Playback IndicationsOutput Level Adjustment With Source Signals Night ModeNormal output level adjustment for Tape RecordingMemory Backup Indicator SelectIndicator off Select to activate the sensorAdvanced Features Turn On Volume LevelDisplay Brightness Surround Back/Multiroom SpeakerAdvanced Features / Multiroom Operation Semi-OSD SettingsFull-OSD Time Out Adjustment InstallationMultiroom Setup Multiroom OperationMultiroom Operation If the Remote IR Output jackTuner Operation Basic Tuner OperationRDS Tuning RDS OperationRDS Display Options Program Search PTYProgramming the Remote with Codes Direct Code EntryTurn on the unit you wish to program into the AVR remote Must be repeated firstCode Readout Programming the RemoteMacro Programming Programmed Device Functions Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory Function List SPLAVR DVD Troubleshooting Guide Processor ResetPower Switch 1 is pushed Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR507 specifications

The Harman-Kardon AVR507 is a distinguished audio/video receiver that stands out in the realm of home entertainment systems. Launched in the early 2000s, the AVR507 quickly gained a reputation for its powerful performance, elegant design, and advanced feature set.

At the heart of the AVR507 is its robust amplifier section, delivering a substantial output power of 70 watts per channel across seven channels. This ensures immersive surround sound experiences that bring movies, music, and games to life with clarity and depth. The receiver supports various surround sound formats, including Dolby Digital and DTS, enabling users to enjoy cinematic audio quality right in their living room.

One of the key highlights of the AVR507 is its remarkable multi-zone capabilities. Users can setup different audio zones throughout their home, making it possible to play distinct audio sources in separate areas. This can be especially beneficial for larger homes or entertaining spaces where various preferences for music or audio may exist.

The AVR507 also boasts a comprehensive suite of connectivity options. With multiple HDMI inputs, component video, and optical audio inputs, it accommodates a wide range of devices, from Blu-ray players to gaming consoles. It also features an integrated AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

In terms of user experience, the receiver employs an intuitive on-screen graphical user interface, facilitating easy navigation through menus and settings. The included remote control offers convenient access to all of the AVR507's features, making for a smooth and user-friendly operation.

Another noteworthy technology within the AVR507 is its built-in digital signal processing (DSP), which enhances audio playback by optimizing sound quality based on the specific setup and speaker configuration. This ensures that whether you are watching a high-octane action film or listening to a subtle acoustic track, the audio remains balanced and rich.

The AVR507 also incorporates high-quality DACs (digital-to-analog converters) that are crucial for exceptional audio fidelity. The result is a receiver that not only excels in power and performance but also provides a refined listening experience.

In summary, the Harman-Kardon AVR507 is a versatile and powerful audio/video receiver that embodies a blend of advanced technology, user-centric design, and superb performance. Its multitude of features makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents