Electrolux 60820 manual There are problems with the operation of the dish- washer

Page 31

Operating Instructions

...there are problems with the operation of the dish- washer.

	Symptom	Possible Cause	Solution
		The door of the dishwasher is	Shut the door.
		not closed properly.
	The programme does	Mains plug is not plugged in.	Insert mains plug.
	The programme does	House fuse is defective.	Replace fuse.
	not start.	House fuse is defective.	Replace fuse.
			If the dishes are to be
		A start delay is selected.	washed immediately, set the
			start delay to 0 hours
		The washing compartment is	Only wash cutlery and dishes
		made from rust-free stainless	that are suitable for dish-
		steel. Rust spots in the wash-	washer use.
		ing compartment are due to
	Rust spots are visible in	rust particles from external
	the washing compart-	sources (rust particles from
	ment.	water pipes, pans, cutlery,	Close the lid of the special
		etc.). Remove such spots with	Close the lid of the special
		etc.). Remove such spots with	salt container securely.
		one of the stainless steel
		cleaners that are generally
		available on the market.
	There is a whistling	The whistling is not a cause	Use a different brand of
	noise during washing.	for concern.	detergent.

...the wash results are not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were loaded is such a way that the wash waster did not reach all items. The racks for the dishes must not be overloaded.

–The filter in the base of the washing compartment is dirty or incor- rectly positioned.

–Detergent was not used or too little was used.

–In the case of scale deposits on the dishes: The special salt container is empty or the water softener is incorrectly adjusted.

–The drain hose is incorrectly laid.

31

Image 31

Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents What to do, if Installation and Connection InstructionsGeneral Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Multi-Display can display Control PanelPrior to using for the first time Special salt Adjusting the Water SoftenerYour area Electronic adjustment Turning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Use dishwasher salt Open the door, remove the lower RackRinse Aid Switching Rinse Aid Supply On and OffThere are two ways to add rinse aid Fully open the rinse aid compartment lid Filling with Rinse AidDaily Use Adjusting Rinse Aid DosingNot be washed in the dishwasher Loading Cutlery and DishesForks in the cutlery tray Loading CutleryTioned horizontally in the upper basket Place knives, small spoons and smallLoading Pans, Frying Pans Large Plates Fold the plate insert to the left Loading Cups, Glasses and Coffee ServicesLowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentDetergent tablets Concentrated DetergentAutomatic Wash Programmes Soiling Selecting the Wash Programme Programme TableChanging the wash programme Changing/Interrupting/CancellingStart the Wash Programme Wash ProgrammeChanging the delay start Setting or Changing the Delay Start TimerCancelling the wash programme Dishwasher is switched on againImmediately after the end of the programme Switching Off the DishwasherLoad Sensing Sensor Logic Emptying the DishwasherCleaning the Filter Care and CleaningStances What to do, ifSymptom Possible Cause Solution Error messagesWrong wash programme was selected There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyLower rinse aid dosing Technical DataDishes are wet and dull Rinse aid was not used Rinse aid container is emptyUpper basket without cutlery tray Sample loading arrangementsLower basket with cutlery basket Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG