E Series Oven Operation | 22 |
|
|
Bake Stone Mode
SETTING CONTROLS
1)Touch STONE.
2)Oven temperature is preset at 400°F (205°C). Oven begins to heat after five seconds. To change oven temperature from 400°F (205°C), immediately enter another temperature using the number pads.
3)Touch ENTER to start the cooking mode immediately, otherwise the oven will automatically start the mode in 10 seconds if there is no action.
4)Add food when the chime signals that the oven has reached preheat temperature.
5)If the temperature probe is used, follow temperature probe feature directions on pages
6)If the timer is set, the oven will chime when the cooking time is finished. If the timer is not cleared, it will continue to chime every 10 seconds.
7)Remove food. Always use dry pot holders when removing hot pans from the oven.
8)Touch oven OFF to end this mode.
BAKE STONE ACCESSORY
The bake stone accessory is available through your authorized Wolf dealer. For local dealer information, visit the find a showroom section of our website, wolfappliance.com. Additional use & care information is provided with the bake stone accessory.
BAKE STONE CARE
Remove excessive food using a scraper. Brush off any crumbs. Allow the stone to cool completely before wiping with a wet cloth. Wet cloths on a hot surface can cause steam burns. Do not soak or immerse the bake stone in water and do not use soap or detergent. The ceramic stone could absorb the taste and transmit those flavors to the food.
Stubborn stains may occur on the bake stone. These will not impair the flavor of the food being baked.
Allow the bake stone to cool completely before removing from oven.
IMPORTANT NOTE: Use care in handling the bake stone. It will chip or break if dropped.
Allow the bake stone to cool completely before wiping with a wet cloth. Wet cloths on a hot surface can cause steam burns.