![](/images/new-backgrounds/1060489/6048917x1.webp)
Use the following chart as a guide when setting heat levels.
SETTING | RECOMMENDED USE | ||
|
|
| |
HI | ■ | Start food cooking. | |
| ■ Bring liquid to a boil. | ||
|
|
| |
Medium High | ■ | Hold a rapid boil. | |
between | ■ | Quickly brown or sear food. | |
MED and HI | |||
|
| ||
|
|
| |
MED (Medium) | ■ | Hold a slow boil. | |
| ■ Fry poultry or meat. | ||
|
|
| |
Medium Low | ■ | Stew or steam food. | |
between | ■ | Cook pudding, sauce, icing or | |
MED and LO | |||
| gravy. | ||
|
| ||
|
|
| |
LO | ■ | Keep food warm. | |
| ■ | Simmer. |
TripleTier® FlameBurner with InstaWok™ Grate
A
B
C
A. Wok supports pointing down (for use with
B. Cooktop grate with InstaWok™ Grate insert (left side of range only)
C. Reversible InstaWok™ Grate insert
The TripleTier® Flame Burner with InstaWok™ Grate is a multifunction burner that produces everything from a rapid boil down to a low simmer.
The TripleTier® Flame Burner with InstaWok™ Grate is functioned by a dual valve control knob, which controls 2 separate burners. See “TripleTier® Burner with High Power Burner and Low Power Simmer Settings” in the “Cooktop Controls” section.
The InstaWok™ Grate supports 12" to 14" (30.5 cm to 35.6 cm) Wok pans and can be flipped over to become a flat grate for use with
IMPORTANT: The InstaWok™ Grate must be in place when you are using the TripleTier® Flame Burner.
To Use the InstaWok™ Grate:
1.Check that the control knob is in the OFF position and the grate is completely cool before handling.
2.Remove grate from cooktop and flip the grate over so that the wok supports are pointing up.
A
B
C
A. Wok supports pointing up
B. Cooktop grate with InstaWok™ Grate insert (left side of range only)
C. Reversible InstaWok™ Grate insert
3.Place the wok grate within the supports.
Sealed Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.
Burner Cap Alignment
Always keep the burner cap properly fitted in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.
TripleTier® Flame Burner
A
B | E |
C |
|
D |
|
A. TripleTier® flame burner caps
B. Burner base
C. Alignment pins
D.Igniter
E.Gas tube opening
9