Wolfgang Puck BBLFP050 manual Using Your Food Processor Cont

HSN_3n1BlenderManual 6/25/10 11:06 AM Page 11

Using Your Food Processor

cont.

Using Your Food Processor

cont.

Locked

Figure 10

Released

Figure 11

8Pull the Power Cord out out of the Storage Cavity at the rear of the Motor Housing. Ensure that the cord is over the larger opening in the cord storage area and not in the locked position, see figs. 10 and 11.

9Insert the plug into the wall outlet.

If after plugging the cord in, all indicator lights are flashing, the Mixing Bowl and/or the Lid is not placed correctly on the Motor Housing. For safety reasons it is not possible to switch on the appliance in Food Processor Mode UNLESS both bowl and Lid are properly assembled. Check the position of the bowl and the Lid and ensure that it matches Figures 7 & 9. When the Mixing Bowl and the Lid are fitted correctly, only the Standby Indicator Light flashes. Only then can the appliance be operated.

10Press the P(ulse) button to have the Motor Housing run for a short period at high speed (pulse function) or press the I button for continuous low speed or the II/FROZEN DRINK button for continuous high speed. The Standby Indicator Light will dim and the blue indicator light for the selected speed will be illuminated.

1 1 Add ingredients during use via the Food Chute in the Lid. Use the Food Pusher to push solid ingredients downwards through the chute opening.

12Use the Food Pusher to close the Chute opening during use so that nothing can fall into or splash out of the Mixing Bowl.

13You can turn the motor off by pressing the

14Remove the Mixing Bowl by rotating counter clockwise and lifting straight up. Remove the Processing Blade with the Accessory Shaft from the bowl before emptying.

•Your electronically-controlled motor comes equipped with an automatic overload protection system which serves two functions:

1)Time Protection: After two minutes of continuous operation, the motor will shut off. Fifteen seconds before switching off, the Standby Indicator Light will begin to flash. This prevents the motor from overheating during use; and

2)Overload Protection: In the event of an electrical overload, the motor will automatically shut off. Simply unplug the unit from the outlet. Wait at least 15 seconds before using again.

•To avoid personal injury or damage to the appliance, never insert a hand or another object into the Mixing Bowl while the appliance is being used.

•Always use the Food Pusher to push ingredients. Never use your fingers, a fork or another object to push ingredients.

•Do not remove the Lid from the Mixing Bowl before the Processing Blade has stopped moving.

•To remove the Processing Blade from Accessory Shaft, press the two side lock tabs in, and carefully the lift the blade off the Shaft. See Figure 12.