Hotpoint BS42 BS52 manual Auto Cooking Programmes

Page 11

ELECTRONIC CLOCK & AUTOMATIC OVEN TIMER OPERATION

AUTO COOKING PROGRAMMES

There are two Auto Cooking programmes that can be selected using your timer:–

(a)To set the timer to switch the oven(s) On and Off Automatically

(b)To set timer to switch on immediately and OFF automatically after a set cook period.

a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY

This allows you to cook at a specified time for a chosen period before the oven switches off Automatically.

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day. Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).

Step 3 Press and hold in the button.

The display will read 0.00 with the cookpot ( ) symbol lit.

Step 4 With the button still held in, set the required Cook Period using the “+” and “–” buttons.

Release the buttons and the timer display will revert to the time of day with the Auto symbol and Cookpot ( ) symbol lit.

Step 5 Press and hold in the button.

The display will read the earliest possible end time for the Cook Period that you have set above.

The Auto symbol and Cookpot ( ) symbol lit.

Step 6 With thebutton still held in, use the “+” and “–” buttons to set the “End Time” (i.e. The time you require the oven to switch off).

Release all the buttons and the timer will revert back to the time of day.

The “Auto” symbol will remain lit to signify that an Auto Cooking Programme has been set. The ( ) symbol will go out.

Step 7 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.

Note: If your appliance has two ovens: When the timer has been set for one oven it is possible to use the other oven only during the same Automatic programme.

At the end of the Automatic Cook Period the Auto Symbol will flash and an intermittent bleeping sound will be heard.

The bleeping sound will continue for approximately 2 minutes unless cancelled. The “Auto” symbol will continue to flash until the timer is returned to Manual operation (see below).

Step 8 Press the button to cancel the bleeping sound. (If 2 minutes has not elapsed).

Step 9 Turn the oven control(s) to the OFF position.

Step 10 Press the button again to return the oven(s) to Manual Operation. (The Auto symbol will go out)

11

Image 11
Contents BS42 BS52 Contents Introduction Safety Advice For Your SafetyNever Know Your Oven Control Markings Control PanelHints on Automatic Cooking Oven Timer OperationAutomatic Cooking Clockface Know Your TimerSymbols Timer Function ButtonsSetting the Minute Minder Setting the Time of DAYAuto Cooking Programmes Electronic Clock & Automatic Oven Timer Operation Other Notes on Timer Operation Step Grill PAN & HandleGrill PAN Food Grid Door Position for Grilling Surfaces get extremely hot Grilling ProcedureOven Utensils Temperature & TimeOven Shelf Positioning for FAN Oven FAN Oven Operation Operation ‘S’ Slow Cook SettingPoints to Consider When Preparing Food for Slow Cooking Advantages of Slow Cooking areOven Temperature Conversion ScaleConventional Fan If Using Aluminium Foil Oven Temperature Charts MeatBaking Fan Oven Cooking Oven Temperature Charts BakingBaking General Cooking Results not SatisfactoryGrill Cleaning Care and CleaningStayclean Oven Liners How Stayclean worksRemovable Grill Roof Panel not all models Cleaning the OvenBase of Main Oven Grill/Meat Pan & Oven ShelvesControl Panel / Trims / Inner Door Panel & Glass Replacement of the Oven LampHOW to Clean the Lamp Lens Cleaning the Doors General Installation InstructionsMains Supply Oven Unit Housing CabinetsElectrical Installation All cases adhere to routing details see fig Final InstallationConduit BOX to Mains Terminal Block List of Loose ItemsUnder Min 550mm pipes Excluding Other 550mm Something WRONG? Steam / Condensation in the oven after use Grilling is uneven Oven lamp does not workPage Page Key Contacts