2. Insert the blade assembly with rubber gasket ring into the stainless steel collar, resting the blade assembly inside
the collar.
3.Using caution, place the
blender jar (leading with the threaded bottom) into the stainless steel collar, over the blade assembly, resting on the gasket. Gently tighten (fingertip tight) until securely in
place. Do not over-tighten.
4. Make sure the lid cap is inserted into the center of the lid, twisting it to connect. Place the lid onto the blender jar, pressing down firmly to seal
the opening to the blender.
5.Slide the bottom of the assembled blender jar down onto the blender base*, positioning the blender jar with the handle to the side so you can read the measurement markings on the jar.
6.Plug the power cord into a suitable outlet. The blender is now ready for use.
*NOTE: As a safety precaution, the blender will not operate if the blender jar is not properly positioned on the blender base.
6