Frymaster Fryer Troubleshooting: Solutions for Common Issues

Page 43

Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS

CHAPTER 7: TROUBLESHOOTING

7.2 Fryer Troubleshooting

For FAST-equipped fryers, consult the FAST controller manual. These steps apply to the KFC-1 SMS controller only.

 

 

1.

Check wall circuit breakers.

Reset, if

 

 

 

needed.

 

 

Controller fails to turn ON

2.

Check fryer connection to external

7.2.1

 

power source.

 

when ON/OFF button is

3.

Disconnect fryer from power supply.

 

pressed.

 

 

4.

A power surge or outage may have

 

 

 

temporarily locked out controller.

 

 

If the fryer still fails to turn ON when the

 

 

ON/OFF button is pressed, contact an

 

 

authorized service agent.

 

 

 

 

 

 

 

1.

Ensure float-switch is not stuck in

 

 

 

"down" position. Contact a FAS for

 

 

 

service if float-switch is defective.

7.2.2

Controller is ON, but the

2.

If the KFC-1 SMS controller displays

 

gas valves fail to energize.

 

HELP, reset high-limit

thermostat

 

 

 

(located in the fryer cabinet under the

 

 

 

control panel). Contact a FAS for

 

 

 

service if high-limit will not reset.

 

 

 

 

 

7-2

Image 43
Contents 8196329 Page Page KSCF/C/HC18G Cool Zone Gas Fryers Ordering Parts After PurchaseSafety Information Service InformationController Information Safety Information Service Personnel General Receiving and Unpacking EquipmentIf your equipment arrives damaged Principles of Operation Pre-InstallationRating Plate ANSI/NFPA #70 Australian installations must meetAir Supply and Ventilation Equipment Installed at High AltitudesRestraining the Fryer Page Leg and Caster Installation Installing the FryerGeneral Leveling the Fryer InstallationLegs Only Installing Optional Swivel CastersRigid Casters Only Gas Connections Manual Shut-off Valve Rigid ConnectionsRegulating Gas Pressure Flexible Couplings, Connectors and Casters Adjustments/Adaptation To Different Gases GAS Supply for Which IT is not Configured Gas Conversion ProceduresElectrical Connections Safety SwitchesFryer with KFC-1 Computer Microswitch is located on the red handle at the drain valve Return system Final Preparation Initial Cleaning Before StartupDrop Pilot lighting procedures Standing Pilot Start-Up ProceduresGeneral Use Pilot lighting procedure Electronic Ignition Filtering See for detailed filtration proceduresClosing Filter Powder Filter Paper Filter PreparationFilter Preparation Page Filter Operations Remove large debris floating in the oil Removing support grid from frypot prior to draining Filter Operations Filter Operations Page Weekly DailyBuilt-in Filtration Periodic/AnnualStainless Steel Periodic/ AnnualIntroduction Pressed Fryer TroubleshootingCont Burner Tube Remains after closing drain Main burner malfunctions Pump wont Start Filtration System TroubleshootingWiring Diagrams Fast controller Non-CE Fast Controller CE Fast Controller India KFC-1 Controller This page Intentionally Left Blank Service Hotline

Y/KSCF/C/HC18G specifications

The Frymaster Y/KSCF/C/HC18G is a modern deep fryer designed for high volume cooking, particularly suited for the fast-paced demands of commercial kitchens. With its robust engineering and innovative technologies, this fryer delivers exceptional performance, ensuring efficiency and consistency in food quality.

One of the standout features of the Frymaster Y/KSCF/C/HC18G is its high-capacity frying capability. Designed to accommodate large batches, it can hold significant amounts of oil, allowing for the frying of various foods simultaneously, thus optimizing cooking times. This fryer is ideal for establishments that requires consistent output, such as restaurants, cafeterias, and food trucks.

The Y/KSCF/C/HC18G incorporates advanced oil filtration technology, which is crucial for maintaining the quality of the frying oil over extended periods. This system automatically filters oil during idle times and prior to cooking cycles, removing food particles and prolonging the life of the oil, ultimately leading to cost savings for businesses. The filtration process also contributes to better-tasting foods by reducing the build-up of unwanted residues.

Another innovative characteristic of this fryer is its precise temperature control. The Frymaster Y/KSCF/C/HC18G utilizes a digital control system that allows operators to set and monitor cooking temperatures accurately. This feature helps achieve optimal frying conditions for different food types, ensuring that items are cooked evenly and to the desired crispness.

Energy efficiency is another important aspect of the Frymaster Y/KSCF/C/HC18G. Equipped with high-performing heating elements, this fryer heats up quickly and maintains temperature consistently, reducing energy consumption. Features such as programmable cook times and automatic shut-off further enhance energy efficiency, contributing to lower operational costs.

Safety is paramount in commercial kitchens, and the Frymaster Y/KSCF/C/HC18G is designed with multiple safety features. It includes an automatic safety shut-off system that activates if the fryer reaches dangerously high temperatures, thereby preventing overheating and potential hazards.

In summary, the Frymaster Y/KSCF/C/HC18G is an outstanding deep fryer that combines high capacity, efficient oil filtration, precise controls, energy-saving features, and robust safety mechanisms. It is an ideal choice for operators seeking reliability and excellence in their frying operations, ensuring that they can meet customer demands without compromising on quality.