Frymaster FGP55 operation manual Canada

Page 3

DANGER

The front ledge of the fryer is not a step. Do not stand on the fryer. Serious injury can result

from slips or contact with the hot oil.

CAUTION

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or

any other appliance.

CAUTION

Instructions to be followed in the event the operator smells gas or otherwise detects a gas leak must be posted in a prominent location. This information can be obtained from the local gas company or gas supplier.

WARNING

No structural material on the fryer should be altered or removed to accommodate placement of the rethermalizer under a hood. Questions? Call the Frymaster Dean Service Hotline at 1-800-551-8633.

WARNING

Do not bang fry baskets or other utensils on the fryer’s joiner strip. The strip is present to seal the joint between the frypot. Banging fry baskets on the strip to dislodge shortening will distort the strip, adversely affecting its fit. It is designed for a tight fit and should only be removed for cleaning.

NOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS

U.S.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: 1) This device may not cause harmful interference, and 2) This device must

accept any interference received, including interference that may cause undesired operation.

While this device is a verified Class A device, it has been shown to meet Class B limits.

CANADA

This digital apparatus does not exceed the Class A or B limits for radio noise emissions as

set out by the ICES-003 standard of the Canadian Department of Communications.

Cet appareil numerique n’emet pas de bruits radioelectriques depassany les limites de

classe A et B prescrites dans la norme NMB-003 edictee par le Ministre des Communications

du Canada.

ii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 8195845 Page Canada Table of Contents FGP55 Component Identification FGP55 Rethermalizer Sequence of Operation FGP55 Series Rethermalizer Safety InformationShipping Damage Claim Procedure Maintenance/Repair InformationComputer Information Retain and Store this Manual in a Safe Place for Future USE General FGP55 Series Rethermalizers InstallationInstallation Instructions Service PersonnelNational Code Requirements Pre-Connection Preparations Caster/Leg InstallationIncoming Gas Pressures Check for GAS Leaks Boil-Out Instructions Converting to Another Gas TypeOnly Lighting Instructions IntroductionInspect Rethermalizer and Accessories for Damage Daily Checks and ServicesCheck Computer Magic III.5 Setpoint Accuracy Quarterly Checks and ServicesDescription Computer OperationProgramming the FGP55 CM-III.5 Computer Programming the FGP55 CM-III.5 Computer Operating the FGP55 Rethermalizer FGP55 Computer Display Messages FGP55 Temperature Display Options11 FGP55 Clock Display Options 10 FGP55 Boil or Simmer Mode OptionsThis page Intentionally Left Blank Service Hotline

FGP55 specifications

The Frymaster FGP55 is an industry-leading commercial fryer that stands out for its efficiency, performance, and innovative technology. Designed for high-volume frying operations, this model is particularly favored by restaurants, food trucks, and catering services that require reliable equipment to meet customer demand while maintaining optimal food quality.

One of the primary features of the Frymaster FGP55 is its high-efficiency design, which uses advanced heat transfer technology to ensure rapid heating capabilities and consistent cooking temperatures. This not only helps reduce cooking times but also enhances product quality, resulting in perfectly fried foods that are crispy on the outside and tender on the inside.

The FGP55 boasts a generous frying oil capacity, typically around 50 pounds, allowing for the frying of large batches in a single go. This feature is especially advantageous during peak hours when demand for fried foods is at its height. Additionally, the fryer's design includes a filtration system that automatically cleans and filters the oil during operation, extending its lifespan and reducing the frequency and cost of oil changes.

Safety and ease of use are paramount in the FGP55. The appliance is equipped with a digital control panel that allows operators to set precise cooking temperatures and times. This digital interface also provides alerts for oil quality, ensuring that the food remains safe and of the highest quality. Furthermore, the fryer is designed with safety features like a built-in low-oil shutoff, which prevents overheating and potential hazards associated with insufficient oil levels.

Durability is another hallmark of the Frymaster FGP55. Constructed with high-quality stainless steel, the fryer is resistant to rust and corrosion, ensuring a long lifespan even in busy commercial kitchens. The design also includes easy-to-clean components, making maintenance a straightforward task for kitchen staff.

It is also worth noting that the Frymaster FGP55 is engineered for energy efficiency, which benefits not only the environment but also the overall operating costs of a business. By reducing energy consumption, owners can enjoy significant savings over time.

In summary, the Frymaster FGP55 is a powerhouse of a commercial fryer, equipped with high-efficiency technology, a robust filtration system, safety features, and a user-friendly interface. These characteristics make it an essential piece of equipment for any establishment focused on delivering high-quality fried foods while optimizing performance and ease of use. Its proven reliability continues to make it a preferred choice among culinary professionals worldwide.
Top Page Image Contents