Frymaster 24G Series operation manual Gas Connections, CE Requirements

Page 19

24G SERIES FLATBOTTOM GAS FRYERS CHAPTER 3: INSTALLATION INSTRUCTIONS

3.3 Leveling the Fryer (cont.)

NOTE: The installation must be inspected after it is complete to ensure it meets the intent of these instructions. The on-site supervisor and/or operator(s) should be informed that the appliance is installed with restraints. If restraints are removed to move fryer (cleaning beneath and behind, relocation, etc.), ensure that they are re-installed when fryer is returned to its permanently installed position.

DANGER

The fryer MUST be connected to the gas supply specified on the rating and serial number

plate located on the back of the fryer door.

WARNING

If gas odors are detected, the gas supply MUST be shut off at the main shut-off valve. The

local gas company or FASC should be contacted immediately to rectify the problem.

3.4 Gas Connections

CE REQUIREMENTS

Dean 24G Series Flatbottom gas fryers have obtained CE markings for countries and gas categories shown below:

COUNTRIES

CATEGORIES

GAS

PRESSURE (MBAR)

 

 

 

20

GERMANY (DE)

II2ELL3B/P

G20/G25; G30/G31

50

 

I3P

G31

50

AUSTRIA (AT)

II2H3B/P

G20; G30/G31

20

50

 

 

 

 

 

 

 

BELGIUM (BE)

I2E(R)B

G20/G25

20/25

I3+

G30/G31

28-30/37

 

DENMARK (DK)

II2H3B/P

G20; G30/G31

20

FINLAND (FI)

30

SWEDEN (SE)

 

 

 

 

 

SPAIN (ES)

 

 

 

GREECE (GR)

 

 

20

ITALY (IT)

II2H3+

G20; G30/G31

IRELAND (IE)

 

 

28-30/37

PORTUGAL (PT)

 

 

 

UNITED KINGDOM (GB)

 

 

 

SPAIN (ES)

II2H3P

G20; G31

20

37 AND 50

 

 

 

II2Esi3+

 

20/25

FRANCE (FR)

G20/G25; G30/G31

28-30/37

 

II2Esi3P

G20/G25; G31

20/25

 

 

50

 

 

LUXEMBOURG (LU)

II2E3B/P

G20; G30/G31

20

50

 

 

 

 

 

 

 

 

II2L3P

G25; G31

25

NETHERLANDS (NL)

50

 

 

II2L3B/P

G25; G30/G31

25

 

 

30

 

 

 

3-4

Image 19
Contents Gas Fryers Hour Service Hotline 1-800-551-8633 DecemberPage Page Table of Contents Fryer Operations Ordering Parts Service Information24G Series Flatbottom GAS Fryers Introduction Applicability and ValidityDefinitions Safety InformationService Personnel Qualified Installation PersonnelQualified Service Personnel If your equipment arrives damaged 24G Series Flatbottom GAS Fryers Important InformationReceiving and Unpacking Equipment GeneralModel Fryer DescriptionPrinciples of Operation Automatic Safety FeaturesRating Plate Pre-Installation Installation Standards Equipment Installed at High AltitudesAir Supply and Ventilation Heat Input TemperatureConversion of Units CE Systems PressureGeneral 24G Series Flatbottom GAS Fryers Installation InstructionsInstalling the Fryer Leg and Caster InstallationLeveling the Fryer Leg and Rigid Caster InstallationLegs Only Rigid Casters Only Installing Optional Swivel CastersCE Requirements Gas ConnectionsRecommended Gas Supply Line Sizes Gas Types Number of Fryers Supply Line SpecificationsManual shut-off valve Rigid ConnectionsRegulating Gas Pressure Gas Connections Gas Connections GAS Supply for Which IT is not Configured Adjustments/Adaptation To Different GasesCE Units only Gas InputsGas Type Orifice Part Number Gas Conversion ProceduresGas Conversion Procedures Non-CE gas valve typical Conversion Gas Conversion ComponentsElectrical Connections Contact factory at timeInitial Start-up 24G Series Flatbottom GAS Fryers Fryer OperationsCE Units Only Pilot Lighting Procedures, Standing PilotOff position Pilot position On position Pilot Lighting Procedures, Electronic Ignition Systems Boil-Out Procedure Boil-Out Procedure Filling Fryer with Cooking Oil/Shortening Final PreparationOperating Fryers with Thermatron Controllers 24G Series Flatbottom GAS Fryers Controller OperationPosition when in use Weekly 24G Series Flatbottom GAS Fryers Preventative MaintenancePeriodic/Annual 24G Series Flatbottom GAS Fryers Preventative Maintenance24G Series Flatbottom GAS Fryers Preventative Maintenance Pilot Burner Malfunctions 24G Series Flatbottom GAS Fryers TroubleshootingMain Burner Malfunctions Thermatron Controller Calibration Recommended Spare Parts Service Hotline

24G Series specifications

The Frymaster 24G Series is a standout in the world of commercial fryers, designed specifically to meet the needs of high-demand kitchens. This series combines state-of-the-art technology with user-friendly features to deliver an exceptional frying experience. A key characteristic of the Frymaster 24G Series is its advanced frying performance, which allows operators to produce perfectly cooked food with superior quality.

One of the main features of the Frymaster 24G Series is its high-production capacity. The fryers are designed to handle large volumes of food, making them ideal for busy restaurants, fast food outlets, and catering operations. With a wide range of cooking oil options, including vegetable and fry oils, chefs have the flexibility to choose the right medium for their recipes, enhancing the flavor profiles of their dishes.

The 24G Series also boasts an innovative digital control system that allows for greater accuracy and consistency in cooking temperatures. This technology helps to ensure that food is fried evenly and to the desired crispness, which is crucial for maintaining quality in a competitive market. The programmable features enable operators to set specific frying times and temperatures, reducing the chance of overcooking or undercooking.

Energy efficiency is another hallmark of the Frymaster 24G Series. Designed with advanced heat exchange systems, these fryers maximize heat retention and minimize energy consumption, ultimately leading to reduced operational costs. The fryers also feature a reliable filtration system that prolongs oil life by removing food particles and impurities. This not only enhances food taste but also contributes to a healthier frying environment.

Safety is paramount in commercial kitchens, and the Frymaster 24G Series has incorporated multiple safety features, including automatic shut-off mechanisms and cool-to-the-touch exteriors. These safety measures help to protect both staff and customers, reducing the risks associated with high-temperature cooking.

In summary, the Frymaster 24G Series is a powerful and efficient solution for any commercial kitchen. Its combination of high production capacity, advanced digital controls, energy efficiency, and safety features makes it an ideal choice for those looking to elevate their frying operation. Whether frying appetizers, main courses, or desserts, the Frymaster 24G Series ensures consistently high-quality results every time.