INSTALLATION
Installing Front-Mounted Handles for Stainless Steel Door
1.Loosen lower door clip on door with a phillips screwdriver.
2.Locate predrilled hole at base of handle, and fit hollow end of handle over lower door clip.
3.Fit other end of handle over upper door clip and slide up as far as possible.
NOTE: If top of handle does not fit over top clip, loosen lower clip further until fit can be accomplished.
4.Insert phillips screwdriver into predrilled hole at base of handle to tighten screw. Insert plastic button plug into hole.
5.Repeat above steps to install other handle.
Removing Front-Mounted Handles for Stainless Steel Door
1.Remove plastic button plug at base of handle with a very small
•Insert phillips screwdriver into predrilled hole to remove screw.
2.Slide handle down and remove from door clip.
3.Repeat above steps to remove other handle.
Installing
1.Loosen lower door clip on door with a phillips screwdriver.
2.Locate predrilled hole at base of handle, and fit hollow end of handle over left door clip.
3.Fit other end of handle over left door clip and slide left as far as possible.
NOTE: If end of handle does not fit over left clip, loosen right clip further until fit can be accomplished.
4.Insert phillips screwdriver into predrilled hole at end of handle to tighten screw. Insert plastic button plug into hole.
Removing
1.Remove right side plastic button plug at end of handle with a very small
•Insert phillips screwdriver into predrilled hole to remove screw.
2.Slide handle right and remove from door clip.
7