Jenn-Air JDRP430 manual Before Using Bake, To Use Bake, Rack positions

7.If Timer is chosen, enter the cook timer length using the on-screen number keyboard and touch NEXT.

WARNING

Burn Hazard

Use an oven mitt to remove temperature probe. Do not touch broil element.

Failure to follow these instructions can result in burns.

8.The Probe can be used only with Bake, Convect Bake and Convect Roast. If Probe is chosen, select the probe target internal temperature. Use the -5ºF (-1ºC) or +5ºF (+1ºC) buttons to decrease or increase the set temperature, then touch NEXT.

9.Touch ADD STAGE to enter new stage information.

10.Review your settings. Touch EDIT to re-enter the settings or touch DELETE to immediately delete the stage.

11.Touch SAVE or SAVE & START.

When saving, you can enter a name for the food using an on-screen keyboard. Press a keyboard key repeatedly to cycle through its letters. For example, press “ABC” once to enter “a,” twice to enter “b” and three times to enter “c.” After 2 seconds, the letter is accepted, and cursor moves to the next position. A name cannot exceed 40 characters, including spaces. Touch DELETE to delete the last character in the text box.

12.Touch OK.

13.NOTE: If you would like to edit after saving the settings, enter into My Creations from the Home Tab. Select the setting name you would like to edit and touch EDIT at the bottom of screen. Select EDIT for the steps you want to edit then enter new settings.

Bake

During baking, the appropriate heating elements and fan(s) will cycle on and off in intervals to maintain the oven temperature. Bake is used to cook up to 2 racks of food. For best results, allow the oven to preheat prior to placing food in the oven.

A

B

C

D

A. Convection fan

B. Broil element

C. Convection element

D. Bake element

If the oven door is opened during baking, the heating elements will turn off approximately 30 seconds after the door is opened. They will turn on again approximately 30 seconds after the door is closed.

Before Using Bake:

Before using Bake, see the “Positioning Racks and Bakeware” section and the following tips for rack positions.

Rack positions

1-rack baking: 3

2-rack baking: 2 and 4

For meat and poultry: 2

For best results when baking cakes on 2 racks, use racks 4 and 2 for baking. Place the cakes on the racks as shown.

To Use Bake:

1.Touch MODES to move to the Modes menu.

2.From the Modes menu, touch BAKE.

3.After touching Bake, you will move to the Temperature screen, or you may touch the Temperature tab to move to the Temperature screen.

Use the slider to enter a desired cooking temperature or touch the -5°F (-1°C) or +5°F (+1°C) buttons. The temperature must be between 170°F (77°C) and 550°F (288°C).

4.Touch START to begin preheating oven.

OR

5.If a programmed cook time is desired, touch TIMER NOT SET to enter the Cook Timer screen. Enter a cooking length using the on-screen number keyboard to set a timer to alert when cooking ends. The cook time may not exceed 12:00:00. The oven will turn off when the cook time expires.

6.(Optional) To keep food warm after a programmed cook timer ends, press KEEP WARM ON from the Cook Timer screen. See the “Keep Warm™ Option” section for additional information.

7.(Optional) To set a delayed start with a cook time, touch the TIMER NOT SET/COOK TIMER screen and enter desired cook time. Select DELAY START, set the desired start time and touch SET DELAY. To set only a delay start, touch DELAY START from the temperature tab, set the desired time and touch SET DELAY.

8.Touch START to begin cooking or to activate Delay Start.

9.To change a mode, temperature or cook time while the oven is active, touch the appropriate tab. Make a new selection and touch OK.

10.Press CANCEL OVEN (CANCEL LEFT or CANCEL RIGHT on 48" [121.9 cm] models) to turn off the oven.

19