How to Operate
For selecting length of tone “short beeps for 60 seconds”:
Example: To select short beeps for 60 seconds
5
6
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
| Follow step | PROG |
|
| 1 |
0 | Within three seconds after pressing Prog pad at step 4, press |
|
Number/Memory pad “0” once. | PROG | |
|
| |
| “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the | 2 |
| length of beep tone “short beeps for 60 seconds”) will be indicated. |
|
PROG | Press Prog pad. | PROG |
“PROG” will stop blinking. This means that you have completed |
| |
| 2 | |
| programming. | |
|
| |
| Three seconds later, “0” will appear. |
|
• Close the door. Digital Display Window will go blank.
G. PROGRAM LIST
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 |
| Open the door and leave it open. |
|
|
| The oven lamp will turn on and “0” will appear. |
|
2 STOP/ |
| While pressing Stop/Reset pad, press Start pad. | e.g. |
RESET | START | All currently programmed information (the program set into each | PROG |
|
| Number/Memory pad (A/B sides), Beep Tone, and Program Lock | 1 |
|
| information) will continuously appear. | |
|
| HI | |
|
|
| PROG |
|
|
| 1 |
|
|
| MED |
|
|
| PROG |
|
|
| 2 |
|
|
| MED |
|
|
| PROG |
H. CYCLE COUNTER
XXTo Check The Number Of Cycles That The Oven Has Been Used In Manual Mode:
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW | |
1 |
|
| Open the door and leave it open. |
|
|
|
| The oven lamp will turn on and “0” will appear. |
|
2 | STOP/ | POWER/ | While pressing Stop/Reset pad, press Power Level Selector pad. | e.g. |
| RESET | LEVEL | The number of cycles that the oven has been used in manual mode will |
|
|
|
| appear. |
|
- 13 -