Self Diagnostics Failure Code Explanation
This oven monitors its operation and displays a Failure Code in Digital Display Window when a problem occurs.
What to do when a Failure Code appears:
Unplug the oven and wait more than ten seconds before reconnecting. If normal operation does not resume, follow the next chart.
CODE |
| PROBLEM |
| WHAT TO DO | |
|
|
|
|
| |
F01 | Too high temperature of | The oven shuts off automatically. Disconnect the power cord from the | |||
| exhausted air | wall socket. The oven beeps continuously and resets for operation when | |||
|
|
|
| cool. Move the oven to the cooler location. If the problem persists, call | |
|
|
|
| service agent. |
|
|
|
|
|
| |
F03 | Incoming line voltage too | Check line voltage and that voltage adjustment is matched. | |||
| high. | (Refer to page 5 for Power Source Voltage Adjustment.) | |||
|
|
|
| Line Volt. | Connector Color |
|
| This oven is designed |
| ||
|
| to operate with 208 or |
| 208 V | White |
|
| 230 - 240 Volts AC. |
| 230 - 240 V | Black |
F04 | Incoming line voltage too | If the line voltage is other than 208 or 230 - 240 V, consult electrician to | |||
| low. | check outlet. |
| ||
|
|
|
|
| |
F05 | Defective memory IC | If the problem persists, call service agent. The oven will operate even if | |||
|
|
|
| Failure Code appears, just not as designed. Call service agent. If the | |
|
|
|
| problem occurs during memory heating, press Stop/Reset pad. Then | |
|
|
|
| other memory program and manual heating will be possible. | |
|
|
|
|
| |
Defective thermistor | The oven shuts off automatically. If the problem persists, call service | ||||
| circuit | agent. |
| ||
|
|
|
|
| |
F44 | Defective control panel | The oven shuts off automatically. If the problem persists, call service | |||
|
|
|
| agent. |
|
|
|
|
|
| |
Defective relay circuit | If the problem persists, call service agent. The oven will operate even if | ||||
|
|
|
| Failure Code appears, just not as designed. Call service agent. Press | |
|
|
|
| Stop/Reset pad and try again. | |
Defective relay circuit | The oven shuts off automatically. If the problem persists, call service | ||||
|
|
|
| agent. |
|
Note: Above codes shown in Digital Display Window do not indicate all possible failures on the unit.
- 17 -