Connect the power plug after filling with water and close the lid. (1 → 2)
| Notifies when boiled. |
Starts boiling | beep beep |
automatically. | beep beep |
Light on | Light off |
Fall in temperature
() Automatically switches to 190
How to Use
|
|
| Water temperature indicator |
Charging battery indicator (for cordless | Light on |
| When changing the setting of keep warm temperature (☞ P. 19) |
dispensing) |
|
| When adjusting the temperature suitable for tea (☞P. 19) |
| Light on | Press to | |
Press | Press | ||
Pour |
Automatically locked in 10 seconds after dispensing is finished.
Charging battery indicator. (for cord- less dispensing)
Dispensing speed of hot water varies depending on degree of pressing and dispensing time.
Dispensing period (Amount of time to press continuously)
Less than 5 seconds From 5 to 12 seconds More than 12 seconds
Press slightly
Press strongly
*Be careful of hot water splashing if pressed too strongly
Guideline for dispensing volume
Battery charge | Dispensing volume |
volume |
|
Approx. 3L or more (4.0L type)
Almost full volume (3.0L types) w 1
1.5L or less
With cordless dispensing, and before the water boils, there are only two speeds
*1 Full water volume may not be indicated if dispensed frequently .
●Indication lights off and cannot dispense hot water after
Water temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L type) at room temperature 68°F(20°C)
*Temperature falls quicker if water volume is less.
When the unit is not in use
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the | mark. |
| Cautions |
|
|
| |
|
|
| ● Do not pour out water too quickly. |
|
|
| If water is splashed over lid release section or |
|
|
| operation panel, it may cause a malfunction. |
| Lid release part | Operation panel | ● Do not leave water standing in the container. |
|
| It may cause the container to corrode or smell. |
17