Care & Cleaning
Care & Cleaning | Daily | Clean with |
Maintenance | Citric Acid |
Cautions Before cleaning, be sure to disconnect the plug from outlet, dispense water and allow the unit to cool .
Main unit and lid
Clean with a damp, well-wrung cloth.
●Do not wet or soak the main unit in water.
If water enters the main unit from the bottom or from the dispensing spout, it can get into the electrical components in the main unit
and may cause a malfunction. | ● Do not use benzine or thinner. |
● Do not use detergents. | |
(They may leave an odor.) | (They may damage the surface.) |
Inner container
Clean with a wet sponge.
●Do not use abrasives
such as polishing powder, a scrub brush
or a nylon brush. They may damage the fluororesin finish of the inner container.
About "Scale"
While you are using this unit, minerals contained in the water (like calcium) can get stuck on the inner container or on the mesh filter. This is called "scale", and it is harmless.
●
●White or glittering floating material (crystals of minerals)
●Discoloration in the finish like dark brown, gray, or green areas
(metallic ion formed on the fluororesin covering)
This is not discoloration or corrosion of the inner container itself, nor is it flakes from the fluororesin covering.
Clean the inner container using citric acid. (See P.21)
Mesh filter
Clean the filter with a brush.
When filter is clogged, water does not flow smoothly.
* After cleaning the filter, be sure to reattach it 
to the inner container.
Before storing the unit ● Dry it thoroughly.
● Put it into a plastic bag and seal the bag.
20