English
REMOVING AND INSTALLING THE DOORS
You may not need to remove the doors! But if you have trouble getting the unit into its final location, please follow the below door removal and installation instructions. It is suggested, for your safety, to have two or more people to assist you in completing the below task to avoid bodily injury, product damage, or property loss.
Right French Door Removal and Installation
1.Remove the screws on the top hinge cover, then set aside the top hinge cover and lay it down for installing later.
2.Using a screwdriver, remove the top hinge screws. Remove the hinge, then take the refrigerator door off and place it aside for the time being.
3.Remove the middle hinge, if needed.
4.Install the refrigerant door in reverse sequence.
When lifting up the refrigerator hinge and separating it from the door body, please be careful not to drop the door slanted forward.
Left French Door Removal and Installation
1.First remove the top hinge cover as above.
2.Disconnect the water line from back of unit.
3.Remove the hinge screws using a screwdriver, and take off the hinge, then remove the door body and place it in a safe place. Position. (Only for PBFS21). Disconnect the wire cable connector, ground wire and pull water line out from unit.
4.Please remove the middle hinge, if needed.
5.Install the door in the reverse order.
When lifting the hinge as it separates from the door, be careful it doesn’t lean forward and fall, causing you bodily harm or damaging the door.
7