Henny Penny | Model |
| Daily: | |
| 1. | Remove all electrical power supplied to the unit by turning off |
|
| the wall circuit breaker. |
| 2. | Remove all product from the unit. |
| 3. | Remove the racks and pans from the unit and clean with |
|
| soap and water at a sink. |
| 4. | Clean all surfaces with a soft cloth, soap and water. DO |
|
| NOT USE ABRASIVE CLEANSERS. |
|
| DO NOT use abrasives, such a steel wool, or abrasive |
|
| cleaners, such as, chlorine, bromine, iodine, or ammonia |
|
| chemicals to clean the unit. These will deteriorate the |
|
| stainless steel and greatly reduce the life of the unit. |
| 5. | Clean around the electronic controls and the door seal with |
|
| a soft, damp cloth. |
|
| DO NOT use large quantities of water, or a spray hose to |
|
| clean the unit. Damage to the components could result. |
| 6. | Reconnect the electrical power to the unit and unit is now |
|
| ready for operation. |
| Monthly: | |
| At least once a month the air condenser needs to be cleaned of | |
| dust or obstructions for the unit to run effeciently and to reduce | |
| energy use of the unit. | |
| 1. | Remove all electrical power supplied to the unit by unplug- |
|
| ging the power cord from the wall, or by turning off the |
|
| wall circuit breaker. |
| 2. | Using a flathead screwdriver, remove the screws from the |
|
| front panel of the unit. Pull panel down and press in on the |
side of the panel to release the tabs, and remove the panel from the unit.
300 |