Henny Penny BCC/BCR-140, BFR/BCR-350, BCC/BCR-175 manual Location, Bfr

Henny PennyModel BCC/BCR-140, BCC/BCR-175, BFR/BCR-350

2-3. ELECTRICAL	Refer to the table below for electrical ratings for both models.
(Continued)	Model No.	Volts	Watts	Amps	Freq.	Phase
	BCC-140	200	4700	18	50/60	3
		208-240	4700	18	60	3
		230	4700	20	50	1
	BCC-175	200	5800	20	50/60	3
		208-240	5800	20	60	3
		400	5800	9	50	3N
	BCR-140	208-240	2400	12	60	1
		230	2400	10	50	1
		200	2400	12	50-60	1
	BCR-175	200	2400	12	50/60	1
		208-240	2400	12	60	1
		230	2400	12	50	1
	BFR &	200	4100	15	50/60	3
	BCR-350	208-240	4100	15	60	3
		400	4100	10	50	3N
2-4. LOCATION	The Blast Chillers should be placed in an area where the doors can
	be opened, for loading and unloading, without interruption. For
	proper operation, the cabinet must be level.

For maximum efficiency, if the air temperature of the premises is more than 100° F (38° C), the room should have adequate ventilation, taking into account for the heat emitted by the unit.

Clearances should be as follows:

BCC/BCR-140	Top	16 in. (400 mm) for air circulation
	Left Side ...	4 in. (100 mm) for air circulation
	Right Side . 8 in. (200 mm) for air circulation
	Back	4 in (100 mm) for air circulation
	Front	26 3/8 in (668 mm) for door swing
BCC/BCR-175	Top	16 in. (400 mm) for air circulation
	Sides	3 in. (70 mm) for air circulation
	Front	33 3/8 in. (847 mm) for door swing
BFR &	Top	16 in. (400 mm) for air circulation
BCR-350	Sides	3 in. (70 mm) for air circulation
Pass Thru- Front and Back ... 38 1/8 in (970 mm) for door swing
Solid Back-Front		38 1/8 in. (970 mm) for door swing
	Back	4 in. (100 mm) for air circulation

201 2-3