Henny Penny BCC/BCR-140, BFR/BCR-350 manual Maximum duration of de-icing cycle minutes. Press

Page 21

Henny PennyModel BCC/BCR-140, BCC/BCR-175, BFR/BCR-350

3-7. PROGRAMMING

The holding temperature can be changed at this time by

(Continued)

using the Up and Down buttons. Factory setting for air

 

 

 

temperature is 37ºF (3ºC). The minimum temperature

 

 

 

setting is 32ºF (0ºC), and the maximum temperature is

 

 

 

50ºF (10ºC).

 

 

 

7. Maximum duration of de-icing cycle (minutes). Press

06

 

 

 

 

the Alarm button 7 times and the digital display will show

 

 

 

the time duration of the de-icing cycle. The factory setting is 25

 

 

 

minutes, but this can be changed to a maximum setting of 60, or

 

 

 

a minimum of 25, by using the Up and Down buttons.

07

08

09

8.Evaporator temperature for the end of de-icing cycle. Press the Alarm button 8 times and the digital display will show the evaporator temperature at which the controls will automatically turn off the de-icing cycle. The factory setting is 77ºF (25ºC), but this can be changed to a maxi- mum setting of 59ºF (15ºC), or the minimum of 50ºF (10ºC), by using the Up and Down buttons.

9.Temperature differential before high air temperature alarm. Press the Alarm button 9 times and the digital display will show the number of degrees, above the holding tempera- ture, at which an alarm will sound, indicating the hold tempera- ture is too high.

The factory air temperature setting is 27ºF (15ºC), but can be changed to a maximum setting of 54ºF (30ºC), or a minimum temperature of 7ºF (4ºC) by pressing the Up or Down buttons.

10.Temperature differential before low air temperature alarm. Press the Alarm button 10 times and the digital display will show the number of degrees, below the holding temperature, at which an alarm will sound, indicating the hold temperature is too low.

The factory air temperature setting is 27ºF (15°C), but can be changed to a maximum setting of 54ºF (30°C), or a mini- mumof 18ºF (10°C) by pressing the Up and Down buttons.

3-11

300

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Henny Penny Blast Chiller/Freezer Limited Warranty for Henny Penny Appliances Table Ofcontents Blast Chiller FeaturesProper Care AssistanceSafety Unpacking IntroductionBCC-140 ElectricalBCC-175 BCR-140BFR LocationRefrigeration Refrigerant InformationCapacities BFR-350Description Function Operating ControlsOn BFR units Only applicableHenny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350 100 Start-up Basic OperationBasic Operation Convenience Temperature conversion chart is provided for yourDE-ICING Cleaning DailyMonthly BCC-140 Only Seasonal or Prolonged Shutdown CleaningNot Available at this time ProgrammingMaximum duration of de-icing cycle minutes. Press Above, must remain at before the alarms will sound Duration of time the temperatures, in 9International Only. a Frigiprobe sensor temperature To prevent freezing of the product. Press the AlarmFrigiprobe, in of this section. Press the Alarm Blast chilling, low side air temperature limit, when usingBlast chilling, high side air temperature limit, when using Frigiprobe, end of cycle temperature setting. PressStart of a cycle. Press the Alarm button 17 times, Frigiprobe temperature for when the buzzer sounds atTemperature that the buzzer will sound when the product Has reached the danger zone temperature, and must beDisplay Cause Correction TroubleshootingTroubleshooting AlarmsProblem Cause Correction 100 Troubleshooting Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350 100 Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350 201 Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350 201 Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350 201 Quantity BCC BCRDescription 140 175 350 Part Page CPE-USALCO Page Henny Penny International Distributor Network Oman
Top Page Image Contents