Henny Penny BCC/BCR-175, BCC/BCR-140 Blast chilling, low side air temperature limit, when using

Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350

3-7. PROGRAMMING		14.	Blast chilling, low side air temperature limit, when using
(Continued)			the Frigiprobe, in step 12 of this section. Press the Alarm
			button 14 times and the low side air temperature, at which
	20		the compressor cycles on and off, will show in the display.
			This temperature is used in preventing the product from
			freezing, while in the chilling mode, which is described in
			step 12.
			The factory setting is -4ºF (-20ºC), but can be changed to a
			maximum setting of 32ºF (0ºC), and a minimum setting of
			-31ºF (-35ºC), by using the Up and Down buttons.
		15.	Blast chilling, high side air temperature limit, when using
	21
			the Frigiprobe, in step 12 of this section. Press the Alarm
			button 15 times and the high side air temperature, at which
			the compressor cycles on and off, will show in the display.
			This temperature is used in preventing the product from
			freezing, while in the chilling mode, which is described in
			step 12.
			The factory setting is 32ºF (0ºC), but can be changed to a
			maximum setting of 50ºF (10ºC), and a minimum setting of
			23ºF (-5ºC), by using the Up and Down buttons.
		16.	Frigiprobe, end of cycle temperature setting. Press the
	22
			Alarm button 16 times, and the temperature at which ends
			the food probe cycle and starts the hold cycle, will show in
			the display.

The factory setting is 39ºF (4ºC), but can be changed to a maximum setting of 50ºF (10ºC), and a minimum setting of 32ºF (0ºC), by using the Up and Down buttons.

NOTE

The maximum settings for U.S.A. is 39ºF (4ºC), and for

England is 37ºF (3ºC).

3-13 300