|
|
| SECTION 6: PARTS SECTION |
|
| ||
|
| ||
TUB ASSEMBLY (CONTINUED) |
| ||
ITEM | QTY | DESCRIPTION | Mfg. No. |
1* | 1 | Tub Weldment (Not used on 200S) | |
2 | 1 | Rack Assembly | |
2a | 1 | Support Rod | |
2b | 1 | Rack Guide | |
2c | 1 | Front Splash Guard | |
3 | 2 | Bulk Head Plug | |
4 | 1 | Suction Strainer Weldment | |
5 | 1 | Suction Strainer Bracket | |
6 | 8 | Locknut, | |
7 | 2 | Strainer Weldment | |
8 | 1 | Wash Overflow Weldment | |
9 | 1 | Overflow Support Bracket | |
10 | 1 | ||
11 | 4 | Clamp, Hose 1 5/16” to 2 1/4” | |
12 | 1 | Hose, Bottom Manifold Pump, | |
13 | 1 | Tee, Discharge (Machined) | |
14 | 1 | Connector, 1/2” 90° | |
15 | 4 | Nut, | |
16 | 4 | Lockwasher 3/8” | |
17 | 2 | Probe, High Water | |
18 | 4 | Locknut, | |
19 | 6 | Lockwasher, 5/16", S/S, Split | |
20 | 6 | Nut, Hex, | |
21 | 4 | Locknut, | |
22 | 1 | Cover, Wash Heater | |
23 | 1 | Decal, | |
24* | 1 | Decal, High Limit (Not used on 200S) | |
25 | 1 | Decal, Thermostat Regulating | |
26* | 2 | Thermostat Bracket (Only 1 used on 200S) | |
27 | 1 | Thermostat, Regulating | |
28* | 1 | Thermostat, High Limit (Not used on 200S) | |
29 | 1 | Union, 1/4” | |
30* | 2 | Fitting, 1/4" Imperial Brass (Only 1 used on 200S) | |
31* | 1 | Wash Heater Gasket (Not used on 200S) | |
32 | 1 | Hose, Top Manifold Pump, 7” Long x 1 1/2” I.D. |
*1 Note: If you need a replacement Steam Tub Weldment, please have your serial number at hand and call technical support. Technical support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday through Friday. Technical support is not available on holidays. Contact technical support toll free at
200 Series Technical Manual
34