Cleaning and care
During the pyrolytic process the oven is heated to approx. 460 °C . Any residual soiling is burnt off by the high temperatures.
The oven door is automatically locked shortly after the pyrolytic cleaning process starts.
Depending on soiling levels you can choose between two cleaning programmes:
–PY I lasting approx. 2 hours
–PY 2 lasting approx. 2 hours 30 minutes
For safety reasons the door will remain locked until the temperature in the oven cavity has dropped below 280 °C.
Starting a pyrolytic process
^Take all accessories out of the oven.
^Turn the function selector to the pyrolytic . programme position.
h
PY will appear in the diplay.
The digits in the display and the h (Start) symbol will start flashing.
^Use the P or O button to scroll between PY I and "PY 2.
^After selecting PY I or PY 2 press the Q timer button to start the pyrolytic cleaning process.
The appliance door will lock and the heating elements will begin to heat up.
The duration of the cleaning programme can be seen in the display by calling up the g symbol.
You can set a finish time for the pyrolytic process during the first five minutes after starting the programme, for example, to take advantage of cheaper night electricity tarifs. To do this:
^Call up the ) symbol and use the P button to change the end time.
You can change the end time again if you wish at any time up until the programme starts.
At the end of pyrolytic cleaning process
–the ) symbol will start flashing.
–a buzzer will sound, if it is switched on (see "Altering oven settings").
^Turn the function selector to "0".
The buzzer will stop and the symbols in the display will go out.
If the function selector is not moved, the buzzer (if switched on) will sound every five minutes as a reminder that the programme has finished.
This reminder continues for up to 30 minutes.
53