Cleaning and care
Apply a spray oven cleaner to the soiled areas. Leave to take effect for a couple of minutes only!
If necessary use a soft sponge (e.g. a Vileda sponge), soft nylon brush or a scraper suitable for glass surfaces to loosen the soiling.
Repeat the process if necessary.
After cleaning rinse thoroughly with clean water and then dry thoroughly.
Important
For optimum performance of the PerfectClean enamel it is important to clean the oven and accessories after each use.
The surfaces will become harder to clean and the
The following cause lasting damage to the surface structure and reduce the
–abrasive cleaning agents
–wire wool or metal scourers
–pot scourers
–oven cleaning pads
–sponges and cloths which have previously been used with abrasive cleaning agents.
–oven spray must not be used in a hot oven or left on for too long.
–items coated with PerfectClean enamelling must not be cleaned in a dishwasher.
Note
Soiling such as spilt juices and cake mixtures are best removed whilst the oven or tray is still warm. Exercise caution, make sure the oven is not hot - danger of burning!
Spilt fruit juices may cause lasting discolouration of the surfaces and roasting can cause matt areas to appear. Clean these following the instructions given above and do not try and use force to remove them! This discolouration is permanent but will not affect the efficiency of the enamel.
When baking items with a high salt content (e.g. continental pretzels) place them on baking parchment in the baking tray or grill pan. Sodium deposits can cause lasting discolouration to PerfectClean surfaces.
51