Using the coffee machine - first steps
The following notes should help you get to know your coffee machine before starting to use it.
Controls
This machine has sensor controls which react to touch. To operate the machine, you only need to touch the relevant sensor. There are five sensors:
sOn/Off sensor: For switching the machine on or off
<> Left/right arrows: For scrolling through the various programme options
OK Sensor for confirming the selection of a programme option and for saving a setting
/Drink selection sensor (coffee or espresso)
Display
COSIo Espresso
K1 K2 K3 K 4 K5 L o n G k C
The following symbols come up in the display in the main menu:
KUp to 5 different types of coffee
LSteam
oHot water
nUser profile for up to 9 different users
GRinsing
kDescaling
CSettings: Customising your machine
^The arrow sensors are used to select a programme option in the display. Touch the OK sensor when the option you want appears highlighted in the display.
Before using for the first time
The machine must be correctly set up or installed in its housing unit (depending on model) and connected (see "Electrical connection" and "Installation") before it is used for the first time. It must then be cleaned (see "Cleaning and care").
Remove any protective foil from the front of the machine.
Switching on
^Touch the On/Off sensor s to switch on the machine.
When the machine is being switched on for the first few times with the master switch, a welcome screen and some other messages will appear briefly. The welcome screen will be displayed each time the machine is switched on until 5 drinks have been prepared.
Míele Willkommen
13