Cleaning and care
Grille with drip tray cover
^Take the grille and drip tray cover out and wash them.
The plastic grille must only be washed by hand.
^Lift the carousel runners up (a), and pull forwards to remove b.
^Clean the capsule carousel and carousel runners with hot water and a little
Capsule carousel and carousel runners
^Pull the carousel runners a out as far as possible.
^Remove the capsule carousel b by pulling it upwards.
^Also clean the area under the carousel runners. It is particularly important to clean the sensor which is used to recognise the capsule chambers as well as the recess in the floor. After cleaning, dry with a soft cloth.
^To put the carousel runners back in, place them on the guide rails and push them into the machine until they click into position.
^Insert the capsule carousel. You do not have to position it in a particular way, as the machine will automatically guide it into position.
^Push the carousel runners with the capsule carousel fully back into the machine.
45