Making drinks
Do not set the valve between these two settings as this will cause the milk to sputter.
Milk can be frothed and dispensed straight into a cup, or heated or frothed in the cappuccinatore jug first and then poured manually into the cup. The spout must be pushed in or pulled out:
–Milk spout pushed in: Milk will be frothed and dispensed directly into the cup
–Milk spout pulled out: Milk will be frothed in the cappuccinatore jug
Heating the milk in the cappuccinatore jug gives you hotter milk.
Cold milk makes the best froth.
Do not use milk with additives. Sugar additives would stick to the milk pipework and damage the coffee machine and the cappucinatore.
Steam release is controlled by a timer. If you do not get sufficient froth in your cup and the steam jet has stopped releasing steam, please shut off the steam valve on the machine. Press it downwards again to reconnect it with the cappuccinatore.
Dispensing froth directly into the cup
^Push the spout into the lid as far as it will go.
^Turn the valve on the cappuccinatore clockwise as far as it will go.
^Fill the cappuccinatore a up to the upper marker with cold milk and replace the lid.
^Place the cappucinatore into the insert in the drip tray and place a cappuccino cup underneath the coffee spout b.
^Press down the steam valve slowly and carefully to connect it to the cappuccinatore.
19