Making drinks
The steam valve must engage in the lower position in order to connect properly with the cappuccinatore.
^When you have enough froth in the cup push the steam valve upwards again.
Preparing cappuccino
^Dispense milk froth into the cup, as described above.
^Use the drink selection sensor to select Espresso.
^Touch the OK sensor once.
The espresso will be dispensed from the coffee spout, and your cappuccino is ready.
You can also prepare milk froth and espresso at the same time. Making it at the same time will, however, leave the cappuccino looking a bit brown. It is also harder to get the ratio of coffee to milk right.
You can only make coffee and froth at the same time if the steam system is set up for this. See "Settings: customising your machine - Setting the Steam system").
Frothing milk in the cappuccinatore
^Pull the spout out of the lid as far as it will go.
^Turn the valve on the cappuccinatore clockwise as far as it will go.
^Fill the cappuccinatore up to the lower marker with cold milk and replace the lid.
^Place the cappuccinatore in the insert in the drip tray.
^Press down the steam valve a slowly and carefully to connect it to the cappuccinatore b.
The steam valve must engage in the lower position in order to connect properly with the cappuccinatore.
^When you have sufficient froth push the steam valve upwards again.
20