Filling the machine with water and coffee capsules
Filling the capsule carousel
Do not put anything other than Nespresso coffee capsules in the capsule carousel.
Do not use coffee capsules which are damaged, broken, dented or bent up at the edges. They can get stuck in the machine.
The capsule carousel has five chambers, each holding four capsules. It is important
to allocate the chambers correctly (see "Allocating and saving a coffee type"). You can fill all the chambers with the same type of coffee, if wished.
Some of the chambers are allocated a type of coffee at the factory. Fill the chambers with the appropriate type of coffee, or
^Pull the carousel runners a out as far as possible.
^Fill the chambers c in the capsule carousel b with capsules. Make sure you put them in correctly with the foil
facing downwards. You can take the capsule carousel out by lifting it upwards to fill it.
Please note that the individual capsules sit loosely in the capsule carousel to prevent them from becoming jammed.
^If you have removed the capsule carousel, place it onto the carousel runners before putting it back into the machine. You do not have to position it in a particular way, as the machine will automatically guide it into position.
^Push the carousel runners fully back into the machine.
^Close the front of the machine.
The machine will now align the capsule carousel. You will be able to hear this happening.
Taking capsules out of the capsule carousel
If you want to change the capsules in the carousel:
^Pull the carousel runners out.
^Pull the capsule carousel upwards to remove it.
^Push upwards on the ring underneath the magazine and then remove the capsules.
16