Settings: Customising your machine
^Touch one of the arrow sensors to set the water hardness, and then touch the OK sensor.
The water hardness level selected is saved to memory.
Setting the display
You can adjust both the contrast and the brightness of the display:
^Select "Settings F" from the Main menu, and then touch the OK sensor.
^Touch the right arrow sensor until "Display" is highlighted and touch the OK sensor.
^Touch one of the arrow sensors to select "Contrast" or "Brightness" and touch the OK sensor.
^Touch one of the arrow sensors to set the contrast lower or higher or the brightness lighter or darker.
^Touch the OK sensor to save the setting.
Setting the volume (keypad tone, buzzer)
You can choose for a tone to sound each time a sensor is touched. The volume of the tone can also be adjusted:
^Select "Settings F" from the Main menu, and then touch the OK sensor.
^Touch the right arrow sensor until "Volume" is highlighted, and then touch the OK sensor.
^Touch one of the arrow sensors to select "Buzzer tones" or "Keypad tone" and touch the OK sensor.
^Touch one of the arrow sensors to set the volume quieter or louder.
If you continue towards the left until none of the small white bars is showing, the tone will be switched off.
^Touch the OK sensor to save the setting.
31