Programming the amount (Setting the portion sizes)
Programming the amount via "Settings"
^Place the appropriate cup for the amount you want to programme under the coffee spout.
^Select "Settings F" from the Main menu, and then touch the OK sensor.
Both coffee and espresso will appear in the display. You can set the quantity of water dispensed for both these drinks.
^Select the type of drink (coffee or espresso) with the arrow sensors and touch the OK sensor.
^Now select the type of coffee you want to drink just now and touch the OK sensor. (If the OK sensor does not react, the chamber for the type of coffee is empty).
^Select "Start".
^When the cup is filled to the level you want, touch the OK sensor.
The portion size for this particular drink is now set and stored in memory. The volume of water programmed in will now be dispensed every time this drink (coffee or espresso) is selected, regardless of the type of coffee chamber selected.
Setting portion sizes for different User profiles
In addition to the standard user profile you can also set specific portion sizes for the
nine other user profiles.
^Use the arrow sensors to select "User profile" and then touch the OK sensor.
^Select "Select" with the arrow sensors and touch the OK sensor.
^Use the arrow sensors to select the name of the user profile for which you want to set the portion size and touch the OK sensor.
A number will appear in the top line of the display beside the user profile symbol n to
show that a user profile has been selected.
Proceed now as described at the beginning of the section.
All settings and water quantities will now apply for that user.
38