Cleaning and care
Maintenance
The capsule hopper in the brew unit needs to be replaced after about 15,000 cups of coffee. Replacement capsule hoppers are available from the Miele Spare Parts Dept.
Settings F
K1 K2 K3 K4 K5 L o n G k C
^Select "Settings F" from the Main menu, and then touch the OK sensor.
^Use the arrow sensors to highlight "Maintenance", and then touch the OK sensor.
^Select "Carry out" and touch the OK sensor.
The capsule hopper inside the machine will be lowered. The following will then appear in the display:
i Remove capsule plate and change the capsule hopper
^Open the front of the machine.
^Take out the capsule plate.
Do not reach into the openings in the brew unit. Danger of injury.
^Pull the rubber connector downwards.
^Using the special tool (supplied) as shown above, turn the capsule hopper to the left to remove it.
^Screw the new capsule hopper to the right into position in the brew unit, as shown above. The spring with the ball in the capsule hopper must be placed so that the ball is at the top.
^Put the rubber connector back on from below (the narrow end or funnel towards the bottom).
^Insert the capsule plate and close the machine front.
50